Lipp Fuel Rail Problem

sprigmo1 · 01-07-2009, 01:08 AM

I purchased a set of PTE Delphi 780cc Injectors for my 1992 Toyota Supra Turbo, and I cant for the life of me get them to not leak after installing them in my LIPP Fuel Rail. Any suggestions??

dannydavi · 01-09-2009, 12:40 AM

umm.. not to familiar with those.. is it leaking from the injectors or the rail itself? and if injectors, is it leaking from all of them?

sprigmo1 · 02-24-2009, 02:20 AM

Leaking from the o-ring side. Just #6!!

tsupranami · 02-26-2009, 06:03 AM

You've replaced the o-ring, correct? If they go in wrong even once they'll leak 4ever. Are you using OEM Toyota o-rings/seals or aftermarket? I've found the aftermarket ones run a hair smaller, so I soak them in gas for an hour or two so they swell up and soften a little before I install them.

01-07-2009, 01:08 AM	#1
sprigmo1 3" Exhaust Join Date: Nov 2005 Location: WALDORF, MARYLAND Posts: 63	Lipp Fuel Rail Problem I purchased a set of PTE Delphi 780cc Injectors for my 1992 Toyota Supra Turbo, and I cant for the life of me get them to not leak after installing them in my LIPP Fuel Rail. Any suggestions?? __________________ " It Ain't Eazy Being Me" 1992 Supra /TSW 618 Rims/Goodridge Brake Lines/Powerslot Rotors/Eibach Springs/Tokico/KYB Struts/ST Sway Bars/Cusco Strut Bars/Targa Bars/RPS Clutch/C's Shifter/Aero.AFPR/RC 560cc Inj/Walbro Fuel Pumps/Lexus AFM/HKS Timing Gears/K&N Intake/HPF Intercooler/Greddy BOV/Turbonetics 60-1 CT26/CSF 53mm RAD /Apexi S-AFC /Apexi AVC-R /Apexi N1Exhaust/RT DP/RT Cat/Jegs Catch Can/Greddy TT/Blitz Boost/EGT Guage/Blitz Peek Hold Device/Lotek Dual A-Pillar Pod/AEM UEGO WB

01-09-2009, 12:40 AM	#2
dannydavi 12psi boost Join Date: Mar 2007 Location: Sacramento, Ca Posts: 373	umm.. not to familiar with those.. is it leaking from the injectors or the rail itself? and if injectors, is it leaking from all of them? __________________ '86.5 Supra - A/T - N/A - JDM Useful Sites: ToyoDIY.com ToyotaPart.com MKIIITSRM

02-24-2009, 02:20 AM	#3
sprigmo1 3" Exhaust Join Date: Nov 2005 Location: WALDORF, MARYLAND Posts: 63	Leaking from the o-ring side. Just #6!! __________________ " It Ain't Eazy Being Me" 1992 Supra /TSW 618 Rims/Goodridge Brake Lines/Powerslot Rotors/Eibach Springs/Tokico/KYB Struts/ST Sway Bars/Cusco Strut Bars/Targa Bars/RPS Clutch/C's Shifter/Aero.AFPR/RC 560cc Inj/Walbro Fuel Pumps/Lexus AFM/HKS Timing Gears/K&N Intake/HPF Intercooler/Greddy BOV/Turbonetics 60-1 CT26/CSF 53mm RAD /Apexi S-AFC /Apexi AVC-R /Apexi N1Exhaust/RT DP/RT Cat/Jegs Catch Can/Greddy TT/Blitz Boost/EGT Guage/Blitz Peek Hold Device/Lotek Dual A-Pillar Pod/AEM UEGO WB

02-26-2009, 06:03 AM	#4
tsupranami Intake Join Date: Jun 2008 Location: Washington Posts: 32	You've replaced the o-ring, correct? If they go in wrong even once they'll leak 4ever. Are you using OEM Toyota o-rings/seals or aftermarket? I've found the aftermarket ones run a hair smaller, so I soak them in gas for an hour or two so they swell up and soften a little before I install them. __________________ 89 Turbo Targa 5spd, 18x10 w/275/35/18, 18x9 w/245/40/18, Brembo CD rotors, Hawk pads, SS lines, HKS coilovers, ST sways, 1 pc. AL DS, V3 shifter, RPSmax PP w/HPF ferramic disk, custom crank, Eagle Rods, JE pistons, Ferrea valves, BC 264 cams, Fidanza cam gears, Walbro FP, AFPR, RC660 inj., Blitz SUS, Lexus AFM, SP 47trim CT26, HKS SSQ BOV, 2.5" AL IC pipes/FMIC, Lipp turbo elbow, RT DP, Greddy SP catback, HKS FCD, AEM Uego WB, Apex'i SAFC, Apex'i AVCR, EGT, Fluidyne AL rad, Flexalite fans.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fuel rail	G-string	MKIII Supra	6	02-15-2011 02:40 AM
fuel pressure	boost32	Non-Generation Specific Questions	1	08-10-2008 10:19 PM
Problem with fuel injectors!	teedoff00	MKIII Supra	3	07-30-2008 05:03 AM
1980 Supra Fuel pump problem	Zebian2	Non-Generation Specific Questions	2	11-20-2005 03:21 AM
Fuel line problem	Damian	MKIII Supra	1	07-23-2005 10:22 PM