01-26-2009, 01:51 AM | #1 |
Stock
Join Date: Jan 2009
Location: Largo, Maryland
Posts: 3
|
Building a turbo car out an N/A body..
I have the turbo wiring harness, a 7m-gte, and a turbo 5 speed transmission. What else do I need to get my Supra running?
|
01-26-2009, 02:35 AM | #2 |
Stock
Join Date: May 2008
Location: california
Posts: 16
|
7 mgte conversion
first off all u need to do some research on the swap. second u need ecu and i think couple other things and u r good to go. but wt year is your car.
|
01-26-2009, 02:41 AM | #3 |
Stock
Join Date: Jan 2009
Location: Largo, Maryland
Posts: 3
|
1988 Supra and I do have the turbo ecu. I've been trying to find things on the swap, all I can think is take out the old ecu/wiring harness and in goes the turbo one right?
|
01-26-2009, 02:57 AM | #4 |
Stock
Join Date: May 2008
Location: california
Posts: 16
|
hi
ya i would say thats is rite
and thats what i did. but i also replaced the wiring harness for the speedometer guage cluster and installed the one from turbo and thats bout it. |
01-26-2009, 08:56 AM | #5 |
Super Moderator
Join Date: May 2007
Location: Billings, Montana
Posts: 1,034
|
Also if you wanna keep using a stock boost gauge you'll wanna get a new gauge cluster. N/A's have a voltmeter where the turbos have the boost gauge.
__________________
1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels |
01-26-2009, 12:33 PM | #6 |
3" Exhaust
Join Date: Oct 2007
Location: SLO
Posts: 234
|
Not to mention you need the intercooler, all pipes, oil cooler, all lines, turbo elbow, downpipe, AFM, HAC sensor if its pre 89, linkages if the motor doesnt have it, motor mounts if its a different year, hardware to mount the intercooler etc, clutch, driveshaft(im pretty sure its a different length for the turbo trans., Slave cylinder for the trans if it doesnt have one, power steering resovore if it doesnt have it ont he engine already. Thats all i can think of for now im sure theres some other little things.
|
01-28-2009, 05:26 AM | #7 |
Intake
Join Date: Jul 2008
Location: Iowa
Posts: 44
|
__________________
ALL BOOST NO JUICE! In need of some 7mge parts, let me know what you got. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HELP PLEASE | Nick0887 | Non-Generation Specific Questions | 4 | 02-28-2009 07:26 AM |
Dream Offer | Karma_Supra | MKIV Supra | 22 | 10-17-2007 03:04 PM |
Sequential Turbo Question | suprapoweredsoarer | MKIV Supra | 1 | 06-06-2006 12:13 AM |