MK3 Cieling lights, easy but help...

Hiccups · 04-02-2009, 01:03 AM

I have an 87 supra and am wondering about the interior lights. I am talking about the ones on the ceiling by the rear view that you turn on when you drop something:P

Heres a pic if you have no idea what im saying:
http://img.photobucket.com/albums/v4...g?t=1238633975

[B]Anyway, THEY DONT WORK. Ive bought new bulbs, wasnt that. Ive got some fuses but im not sure which one it is. I have a feeling that wont work anyway.

What else could it be? The connecting wire isnlt loose either.......

TurboSupera · 04-02-2009, 06:43 PM

Quote:

Originally Posted by Hiccups

I have an 87 supra and am wondering about the interior lights. I am talking about the ones on the ceiling by the rear view that you turn on when you drop something:P

Heres a pic if you have no idea what im saying:
http://img.photobucket.com/albums/v4...g?t=1238633975

[b]Anyway, THEY DONT WORK. Ive bought new bulbs, wasnt that. Ive got some fuses but im not sure which one it is. I have a feeling that wont work anyway.

What else could it be? The connecting wire isnlt loose either.......

If you have a volt meter....make sure there is power coming to the lights. I had the same problem and it turned out to be a loose connection....anotherwards where it clips into the light housing. Mine looked tight, but it wasn't. If you wiggle it just a bit, it will the cause the light to go off or on.

Hiccups · 04-03-2009, 01:54 AM

Do you mean where it clips into the light thing? Ive taken it off a few times and pushed it in. hmm

TurboSupera · 04-03-2009, 09:26 PM

Yes. I did the same thing you did for awhile and couldn't figure it out. I finally used a volt meter and found that there was power but once connected to the light housing it was just loose enough not to work.

Cyberguy1992 · 04-06-2009, 10:46 PM

I had the same problem with mine and i just re-wired them..
Find a good ground somewhere down in the drivers kick panel
get a negitive from the floor board light
get a positive from the fuse box
pop off cover that goes over the whole light
put your negitive from ground to where the lights are grounded

then their are to other wires that come in from the factory wiring. cut those and tape them off. then i dont remember what colors the wires were but it shouldnt be hard to figure out which one goes where..m its easy

Hiccups · 04-07-2009, 04:18 AM

I actually tried wiggling them and it worked. Problem is, I will put it all back together and the light works. But I guess it de-wiggles itself (lol) and doesnt work again. And getting the light cap off isnt exactly easy.

BTW is there a special way to get the bezel (cover) off the lights without just pulling? Cuz im marking it up a lil (slightly, but im a perfectionist)

Thanks for the help btw

04-02-2009, 01:03 AM	#1
Hiccups Stock Join Date: Mar 2009 Location: PA Posts: 26	MK3 Cieling lights, easy but help... I have an 87 supra and am wondering about the interior lights. I am talking about the ones on the ceiling by the rear view that you turn on when you drop something:P Heres a pic if you have no idea what im saying: http://img.photobucket.com/albums/v4...g?t=1238633975 [B]Anyway, THEY DONT WORK. Ive bought new bulbs, wasnt that. Ive got some fuses but im not sure which one it is. I have a feeling that wont work anyway. What else could it be? The connecting wire isnlt loose either.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My brake lights are stuck on. wtf!	Isphius	MKIII Supra	16	09-07-2009 08:48 PM
LF: Lightbulbs guide	lamw001	MKIV Supra	2	09-18-2008 02:23 PM
Radio lights?	bills1988	MKIII Supra	5	08-23-2008 02:33 PM
Brake lights not working!	lifesnotfair	MKIII Supra	18	05-05-2008 11:40 PM
tail lights out need help!	supraman121	MKIII Supra	5	12-21-2006 09:16 PM

04-03-2009, 01:54 AM	#3
Hiccups Stock Join Date: Mar 2009 Location: PA Posts: 26	Do you mean where it clips into the light thing? Ive taken it off a few times and pushed it in. hmm

04-03-2009, 09:26 PM	#4
TurboSupera 3" Exhaust Join Date: Mar 2008 Location: Garden Grove, CA Posts: 106	Yes. I did the same thing you did for awhile and couldn't figure it out. I finally used a volt meter and found that there was power but once connected to the light housing it was just loose enough not to work.

04-06-2009, 10:46 PM	#5
Cyberguy1992 Stock Join Date: Apr 2009 Location: Illinois Posts: 23	I had the same problem with mine and i just re-wired them.. Find a good ground somewhere down in the drivers kick panel get a negitive from the floor board light get a positive from the fuse box pop off cover that goes over the whole light put your negitive from ground to where the lights are grounded then their are to other wires that come in from the factory wiring. cut those and tape them off. then i dont remember what colors the wires were but it shouldnt be hard to figure out which one goes where..m its easy

04-07-2009, 04:18 AM	#6
Hiccups Stock Join Date: Mar 2009 Location: PA Posts: 26	I actually tried wiggling them and it worked. Problem is, I will put it all back together and the light works. But I guess it de-wiggles itself (lol) and doesnt work again. And getting the light cap off isnt exactly easy. BTW is there a special way to get the bezel (cover) off the lights without just pulling? Cuz im marking it up a lil (slightly, but im a perfectionist) Thanks for the help btw