? with bearings

craig · 04-24-2009, 11:16 PM

im buying a bearing kit for the crank and rods. i took the old bearings to a toyota dealer and they said that the factory bearings are mark 2 and that i have to order them from them. problem is they want 2 times the amount that i can get standard one from another source. has anyone ran into this problem? or is the dealer full of shit?

SUPRAMAN3468 · 04-25-2009, 04:38 AM

that the crank and have it checked for wear and ask cam u use the factory bearing r if the need to shave the crank best bet

craig · 04-25-2009, 11:26 AM

the crank is fine and the cam bearings are fine. i just want to replace the crank bearings and rod bearings. but the problem im having is the dealer says i cant use aftermark bearings. they are saying i have mark 2 bearings and that the factory used 5 different size bearings. mark 1-5 basicly has anyone uses standard bearings in there engine? and how was your oil pressure.

04-24-2009, 11:16 PM	#1
craig Stock Join Date: Mar 2009 Location: Maryland Posts: 27	? with bearings im buying a bearing kit for the crank and rods. i took the old bearings to a toyota dealer and they said that the factory bearings are mark 2 and that i have to order them from them. problem is they want 2 times the amount that i can get standard one from another source. has anyone ran into this problem? or is the dealer full of shit? Last edited by craig; 04-25-2009 at 12:33 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rod bearings went out...	OmeGa	MKIII Supra	2	04-17-2008 02:08 AM
Turbo bearings	robwpe	Non-Generation Specific Questions	2	11-19-2007 03:31 PM
pistons, rods, bearings	supraman121	MKIII Supra	0	12-13-2006 02:48 PM
Wheel bearings	nickalvrz	Non-Generation Specific Questions	1	08-25-2006 06:52 PM

04-25-2009, 04:38 AM	#2
SUPRAMAN3468 Stock Join Date: Apr 2009 Location: FLORISSANT Posts: 10 Blog Entries: 1	that the crank and have it checked for wear and ask cam u use the factory bearing r if the need to shave the crank best bet

04-25-2009, 11:26 AM	#3
craig Stock Join Date: Mar 2009 Location: Maryland Posts: 27	the crank is fine and the cam bearings are fine. i just want to replace the crank bearings and rod bearings. but the problem im having is the dealer says i cant use aftermark bearings. they are saying i have mark 2 bearings and that the factory used 5 different size bearings. mark 1-5 basicly has anyone uses standard bearings in there engine? and how was your oil pressure.