modified 7mgte intake gets hot but wont start !

[venomstreetmachine]

Geez man ! I checked all that !
I have 4 AFM units i tried... only sprayed one with starter fluid.
I have a brand new one from the factory on there now ! I dont think that is the problem !

what I dont get is... I only have pressure when I am cranking the car over !
When I turn on the key to acc. it should pressure up the fuel rail but it doesnt ! I am stumped and really frustrated !

and why would my intercooler piping get hot from cranking the car?

I try and start and it does is just crank ! wont start ! I checked the compression and i Have 150 accross all six cylinders... so the timing is good anyway !

I have a good spark ! the coils are firing ! perhaps the wires are on wrong? I started from the passenger side, got the new wires on and new plugs ! Still nothing. so I put a new cold start injector.... still nothing !
WTF? I also have a sweet 3.5 inch exhaust with catback by Greddy
a T4 35 psi turbo with a Tial knock off wastegate 14 psi and a Turbo XS exhaust manifold.
What do I need to check next ?:confused :

I do appreciate you guys trying to help , I really do !