Sm Vac Hose Under Accordian Hose

mirage83 · 07-01-2009, 06:37 AM

Small vacuum line on the bottom of the accordian hose goes to one of the two vacuum tubes on the switch on top of your PS unit (the pump, not the reservoir). Doesn't even matter which. IIRC it adjusts the idle up when you turn the wheel while at idle/dead-slow speed.

As for your trim you can strip and paint/powder coat it, or replace it. It's still available through Toyota.

Chromemoly · 07-03-2009, 12:50 AM

One more question...
The bracket that holds the MAF assy and bolts to the top of the wheel well has a small vacuum tube welded to it. Where do the rubber lines that attach to each end go???

mirage83 · 07-03-2009, 01:19 AM

The end nearest the AFM connects via vacuum line to the bottom tube off of the BVSV on your Tstat housing. The other end connects to the front tube on top of your charcoal cannister.

07-03-2009, 12:50 AM	#2
Chromemoly Stock Join Date: Jun 2009 Location: Las Vegas Posts: 20	Thx...Your no Mirage...Your for Real One more question... The bracket that holds the MAF assy and bolts to the top of the wheel well has a small vacuum tube welded to it. Where do the rubber lines that attach to each end go???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MK3 supra Hose Techniques silicon hoses	Micahwc	Shops & Part Reviews	8	12-09-2012 09:03 PM
Replacing Clutch reservoir Hose and fixing rock plate (plastic one)	Grandavi	MKIII Supra	2	09-29-2008 04:49 AM

07-01-2009, 06:37 AM	#1
mirage83 12psi boost Join Date: Feb 2007 Location: Georgia Posts: 359	Small vacuum line on the bottom of the accordian hose goes to one of the two vacuum tubes on the switch on top of your PS unit (the pump, not the reservoir). Doesn't even matter which. IIRC it adjusts the idle up when you turn the wheel while at idle/dead-slow speed. As for your trim you can strip and paint/powder coat it, or replace it. It's still available through Toyota.

07-03-2009, 01:19 AM	#3
mirage83 12psi boost Join Date: Feb 2007 Location: Georgia Posts: 359	The end nearest the AFM connects via vacuum line to the bottom tube off of the BVSV on your Tstat housing. The other end connects to the front tube on top of your charcoal cannister.