Problem with Head Lights 87 Mk3 Need Help

SupraTaylor · 07-08-2009, 04:41 AM

I have a 87 Mk3 and the right head light is way to high and the left is way to low i've Pulled over like 3 times allready and this Prob has forced me to stop driving at night, i've tried to ajust the hieght by the Knobs that are Right next to them but everytime i turn the lights off the get reset and are never where i ajusted them too Is there some thing else i can do? PLEASE hELP

Bill UK · 07-08-2009, 09:06 PM

The knobs you are adjusting are just for raising and lowing the lamps just in case the motors fail. I'm sure the lamps are adjusted by sprung loaded screws at the front of the lamps, behind the black plastic cover, (not the four screws holding the chrome retaining ring) But 2 larger screws for horizontal and vertical adjustments.

Bill UK · 07-08-2009, 09:51 PM

There you go, the two adjusting screws are marked with yellow arrows.

SupraTaylor · 07-08-2009, 11:39 PM

Thanks Man I will give it a Try

07-08-2009, 04:41 AM	#1
SupraTaylor Stock Join Date: Apr 2009 Location: longview Posts: 12	Problem with Head Lights 87 Mk3 Need Help I have a 87 Mk3 and the right head light is way to high and the left is way to low i've Pulled over like 3 times allready and this Prob has forced me to stop driving at night, i've tried to ajust the hieght by the Knobs that are Right next to them but everytime i turn the lights off the get reset and are never where i ajusted them too Is there some thing else i can do? PLEASE hELP

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
replacing the head and headgasket	skadaloz	MKIII Supra	4	04-13-2009 11:54 PM
Continental Head lights	chris lud	Shops & Part Reviews	1	02-16-2009 01:17 AM
head lights dont work.	4runninghank	Non-Generation Specific Questions	0	12-18-2006 04:00 AM
head gas kit problem	sevenmgte	MKIII Supra	3	03-29-2006 01:53 AM
brake lights problem	MWoz34	MKIII Supra	2	09-14-2005 03:08 AM

07-08-2009, 09:06 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	The knobs you are adjusting are just for raising and lowing the lamps just in case the motors fail. I'm sure the lamps are adjusted by sprung loaded screws at the front of the lamps, behind the black plastic cover, (not the four screws holding the chrome retaining ring) But 2 larger screws for horizontal and vertical adjustments.

07-08-2009, 09:51 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	There you go, the two adjusting screws are marked with yellow arrows.

07-08-2009, 11:39 PM	#4
SupraTaylor Stock Join Date: Apr 2009 Location: longview Posts: 12	Thanks Man I will give it a Try