2jz conversion- tranny link up?...

*D-Joker* · 09-07-2009, 12:48 AM

well i was contemplating puttin a 2jz in my 86', cause i can get a motor for cheap, and my 7m has a bhg, so i thought spend money on a 2j rather than the 7m lol...

i was jus wanderin, can the 2j bolt up to the original mk3 5speed box???

or if i can get the 6speed with the motor...are the box mounts the same like the engine?...or do i have 2 customise??? lol

supra87maniac · 09-07-2009, 03:21 AM

You can use the R154 five speed from the 7m if you use the 1jz bellhousing. You can find one on driftmotion.com.

*D-Joker* · 09-07-2009, 03:30 AM

cool, thanks for that man.

do you know anything bout the 6speed bolting into the original mounting points?

supra87maniac · 09-07-2009, 03:55 PM

I think you can i just don't remember how, maybe someone else will chime in. It would probably be easier to use the R154 though. I will come back on if I find anything out about it.

*D-Joker* · 09-08-2009, 01:07 AM

ok...i hope they are the same mounting points for the gearbox mounts, that would awesome, cause then the motor and box will bolt straight into the car, n i guess i would only hav 2 worry bout the tailshaft and wiring
6 gears will b that lil better than 5 i guess hahaha, n not 2 mention it will b that lil bit stronger.
thanks for your help dude,

yer if any1 has any ideas plz let me know...

btwilson86 · 09-08-2009, 07:31 AM

I'm pretty sure that I've read on this forum that the gear selector is farther back than on a R154 or W58, which means at the very least you will have some metal cutting to do to make it fit

09-07-2009, 12:48 AM	#1
D-Joker Intake Join Date: Aug 2009 Location: Australia Posts: 48	2jz conversion- tranny link up?... well i was contemplating puttin a 2jz in my 86', cause i can get a motor for cheap, and my 7m has a bhg, so i thought spend money on a 2j rather than the 7m lol... i was jus wanderin, can the 2j bolt up to the original mk3 5speed box??? or if i can get the 6speed with the motor...are the box mounts the same like the engine?...or do i have 2 customise??? lol

09-08-2009, 07:31 AM	#6
btwilson86 Super Moderator Join Date: May 2007 Location: Billings, Montana Posts: 1,034	I'm pretty sure that I've read on this forum that the gear selector is farther back than on a R154 or W58, which means at the very least you will have some metal cutting to do to make it fit __________________ 1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The 7mGTE and the Tranny question	panda-supra	MKII Supra	5	10-10-2006 02:25 AM
Conversion or no conversion??	91 Supra	MKIII Supra	1	06-17-2006 03:39 PM
Mk2 Tranny Conversion	panda-supra	MKII Supra	5	02-28-2006 06:04 AM
clutch slip	skunk	MKIII Supra	11	11-29-2005 08:33 PM

09-07-2009, 03:21 AM	#2
supra87maniac Stock Join Date: May 2009 Location: Silsbee,Texas Posts: 13	You can use the R154 five speed from the 7m if you use the 1jz bellhousing. You can find one on driftmotion.com.

09-07-2009, 03:30 AM	#3
D-Joker Intake Join Date: Aug 2009 Location: Australia Posts: 48	cool, thanks for that man. do you know anything bout the 6speed bolting into the original mounting points?

09-07-2009, 03:55 PM	#4
supra87maniac Stock Join Date: May 2009 Location: Silsbee,Texas Posts: 13	I think you can i just don't remember how, maybe someone else will chime in. It would probably be easier to use the R154 though. I will come back on if I find anything out about it.

09-08-2009, 01:07 AM	#5
D-Joker Intake Join Date: Aug 2009 Location: Australia Posts: 48	ok...i hope they are the same mounting points for the gearbox mounts, that would awesome, cause then the motor and box will bolt straight into the car, n i guess i would only hav 2 worry bout the tailshaft and wiring 6 gears will b that lil better than 5 i guess hahaha, n not 2 mention it will b that lil bit stronger. thanks for your help dude, yer if any1 has any ideas plz let me know...