Towing an MKIII - Page 2

cre · 12-31-2009, 02:11 AM

Another possibility:
http://www.supramania.com/forums/sho...d.php?t=105082

scaggsj · 12-31-2009, 06:04 AM

Thanks Ill check both of those the center bearing has at least 1/2" of play you can almost touch the top and bottom not quite a little exageration. It clanks real bad when you go from p or n to drive or rev. So it needs changing anyways and Ill recheck my marks I made didnt have white out so I used wifes fingernail polish and it was harder to see than I thought so thats a possibility although Im pretty sure I got it never hurts to double check. Thanks to you to Cre, Ill def check that out cause It kinda slid a little out and I slid it back in I dont think it moved but I thought it was just one way.

cre · 12-31-2009, 06:20 AM

1/2"? It's toast.

Cyto · 12-31-2009, 08:30 PM

Just load it on a flatbed tow-truck. It's pretty simple.

cre · 12-31-2009, 08:54 PM

I HATE having my car towed... they almost took the bumper off unloading it the last time it scrubbed so hard.... and I don't even have a lip installed.

Cyto · 12-31-2009, 08:59 PM

Yeah, that body kit i have on mine doesn't help anything. When the HG blew I had to load it up and take it up to the garage. When the front lip comes close to hitting the ground get you a peice of a plank or something... Put it under both front wheels, so it will just roll on top of the planks and elevate the front end until it hits the bed. It's seriously that simple.

Load, drive, done.

suicidal · 01-03-2010, 12:36 AM

oh damn i didn't know about that site. well that's good to know for down the road if i start getting vibrations

12-31-2009, 02:11 AM	#11
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Another possibility: http://www.supramania.com/forums/sho...d.php?t=105082 __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

12-31-2009, 06:04 AM	#12
scaggsj 3" Exhaust Join Date: Aug 2009 Location: Florida Posts: 87	Thanks Ill check both of those the center bearing has at least 1/2" of play you can almost touch the top and bottom not quite a little exageration. It clanks real bad when you go from p or n to drive or rev. So it needs changing anyways and Ill recheck my marks I made didnt have white out so I used wifes fingernail polish and it was harder to see than I thought so thats a possibility although Im pretty sure I got it never hurts to double check. Thanks to you to Cre, Ill def check that out cause It kinda slid a little out and I slid it back in I dont think it moved but I thought it was just one way. __________________ 1987 Supra 7MGE - Auto - Stock - White Previoius Toyotas; 1992 Toyota Celica Gt, (Sold) 1988 Toyota Celica Alltrac Turbo (Died)

12-31-2009, 06:20 AM	#13
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	1/2"? It's toast. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

12-31-2009, 08:30 PM	#14
Cyto 3" Exhaust Join Date: Jul 2009 Location: USA Posts: 103	Just load it on a flatbed tow-truck. It's pretty simple. __________________ Proud owner of a 1988 Toyota Supra Turbo, 105k Miles, and great condition. I might have to sell it to help pay for school so here's the link. http://www.toyota-supra.info/forums/...html#post72357

12-31-2009, 08:54 PM	#15
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I HATE having my car towed... they almost took the bumper off unloading it the last time it scrubbed so hard.... and I don't even have a lip installed. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

12-31-2009, 08:59 PM	#16
Cyto 3" Exhaust Join Date: Jul 2009 Location: USA Posts: 103	Yeah, that body kit i have on mine doesn't help anything. When the HG blew I had to load it up and take it up to the garage. When the front lip comes close to hitting the ground get you a peice of a plank or something... Put it under both front wheels, so it will just roll on top of the planks and elevate the front end until it hits the bed. It's seriously that simple. Load, drive, done. __________________ Proud owner of a 1988 Toyota Supra Turbo, 105k Miles, and great condition. I might have to sell it to help pay for school so here's the link. http://www.toyota-supra.info/forums/...html#post72357

01-03-2010, 12:36 AM	#17
suicidal Stock Join Date: Dec 2009 Location: goldsboro nc Posts: 20	oh damn i didn't know about that site. well that's good to know for down the road if i start getting vibrations __________________ tokico shocks, drilled rotors, race pads, stage 2 clutch, full exhaust, custom intake (filter and pipe)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MKIII with overheating issues.	tikibeast	MKIII Supra	4	10-10-2010 04:07 AM
CLOSED WTB - USA-Usable RHD MkIII	GTRacer	Buy/Sell Cars	5	12-02-2009 02:21 AM