1986 Supra Issue

cre · 12-25-2009, 02:52 AM

I HATE working on our e-brakes.... so sis the previous owner of my car apparently. They had the e-barak apart at some point, and instead of reassembling they seem to have just dumped the parts in and slapped the rotor back on to hold them in. Fortunately when a part finally did seize I was only driving slowly down a side street.

Cost a TON to have that one side rebuilt.... a frigging TON. I was sooooo pissed off. No, I didn't rebuild it myself, one of the few things where I knew I didn't have the patience.

And yes, the pads are what 1/8" think new?

Cameroonski · 01-02-2010, 01:21 AM

Ok. So it's a partially siezed E-Brake. Right? Whats the best way of fixing this?

reydio · 01-02-2010, 01:35 AM

Quote:

Originally Posted by Cameroonski

Ok. So it's a partially siezed E-Brake. Right? Whats the best way of fixing this?

Take it apart and see the damage. From there you can tell which items are in need of replacing.

With a car that's over 20 years old, I suggest not to drift it unless you replace and refurbish all the suspension bushings. You are just asking for more expenses and something is likely to go and create more damage.

I purchased mine with a mint body condition but the previous owner did not treat the car well...all the bushings are shot from burning out, clutch was gone......and the list goes on.

mirage83 · 01-02-2010, 02:00 AM

Quote:

Originally Posted by cre

And yes, the pads are what 1/8" think new?

About right, thin enough to shock the hell out of me the first time I got in there to replace the rotor and brake pads on the rear. I was in panic mode trying to find replacements until someone on a forum mentioned that they're thin to begin with. After that I looked closely at mine and found that they were virtually unscarred, probably seldom or never been engaged.

Quote:

Originally Posted by Cameroonski

Ok. So it's a partially siezed E-Brake. Right? Whats the best way of fixing this?

You gotta find out exactly where the problem is first. Pull the rotor and inspect the mechanism itself, make sure the cable isn't pulled tight and binding somewhere. It might be something really simple, won't know until you find out precisely what's going on in there.

Cameroonski · 01-02-2010, 05:34 PM

Alright, thats kinda what i figured, take it apart and see how to fix it. Thanks for the help!

12-25-2009, 02:52 AM	#1
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I HATE working on our e-brakes.... so sis the previous owner of my car apparently. They had the e-barak apart at some point, and instead of reassembling they seem to have just dumped the parts in and slapped the rotor back on to hold them in. Fortunately when a part finally did seize I was only driving slowly down a side street. Cost a TON to have that one side rebuilt.... a frigging TON. I was sooooo pissed off. No, I didn't rebuild it myself, one of the few things where I knew I didn't have the patience. And yes, the pads are what 1/8" think new? __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM

01-02-2010, 01:21 AM	#2
Cameroonski 3" Exhaust Join Date: Dec 2009 Location: Austin, Tx Posts: 68	Ok. So it's a partially siezed E-Brake. Right? Whats the best way of fixing this?

01-02-2010, 05:34 PM	#5
Cameroonski 3" Exhaust Join Date: Dec 2009 Location: Austin, Tx Posts: 68	Alright, thats kinda what i figured, take it apart and see how to fix it. Thanks for the help!