Stock Turbo Boost Gage-'90

Benesesso · 01-24-2010, 11:31 PM

Deleted-----

916MKIIIx2 · 01-25-2010, 05:27 AM

I'm not too sure about the stock boost sensor, but if it does have a vacuum line that runs to the gauge then that could have come undone from the gauge itself. I had this happen to me on my aftermarket boost gauge.

cre · 01-25-2010, 06:15 PM

The gauge is electric. The sensor is located up behind the driver's side wheel well, right in front of the cruise control actuator... they share the same vac source.

cre · 01-26-2010, 01:56 AM

Quote:

Originally Posted by Benesesso

there has to be some vacuum line in there.

Nope, not from the factory anyway. It's possible you're hearing a massive boost leak through the firewall, or something electrical that's buzzing.

cre · 01-26-2010, 02:40 AM

Quote:

Originally Posted by Benesesso

Thanks, but this car seems to have gone nuts. There is a strong hissing noise from the boost gage area, so there has to be some vacuum line in there.

Quote:

Originally Posted by Benesesso

Here's what's really strange. I plumbed a small vac. "T" fitting into one of the intake air chamber vac, lines, and ran it inside the car.

WTF? It's stupid shit like this that's why no one's ever going to be able to help you... did you just forget that YOU added a vac line where the NEVER WAS ONE? Jebus.....

Quote:

Originally Posted by Benesesso

Here's what's really strange. I plumbed a small vac. "T" fitting into one of the intake air chamber vac, lines, and ran it inside the car. As long as my mech. boost gage is plugged in, I can easily hear the noise. But the second I unplug the gage, the noise stops.

Sounds like the diaphragm in the gauges shot. Put a bike pump on the reference port and see if it hold pressure.

cre · 01-26-2010, 05:45 PM

There is NO stock vacuum line run past the firewall... none.

I said stupid shit because YOU posted and asked where the vac line was... I told you, then you argue that it has to be behind the dash because that's where the hissing is... THEN you admit to having put a vacuum line behind the dash yourself... And now you try and twist everything I said about the noise possibly coming from the stock gauge and you seemingly ignore the part about diagnosing your mechanical gauge (the diaphragm is in YOUR gauge, if it holds pressure, you test the hose next)?????

No worries though. I haven't the patience for this right now, so I'll step aside. Good luck with the problem.

01-24-2010, 11:31 PM	#1
Benesesso 3" Exhaust Join Date: Nov 2005 Location: Phoenix, AZ Posts: 145	Stock Turbo Boost Gage-'90 Deleted----- __________________ "You see, wire telegraph is like a very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? Radio operates the same way: You send signals here, they receive them there. The only difference is there is no cat." A. Einstein 1988 and 1990 Turbo Supras Last edited by Benesesso; 02-06-2010 at 03:03 PM.

01-25-2010, 06:15 PM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	The gauge is electric. The sensor is located up behind the driver's side wheel well, right in front of the cruise control actuator... they share the same vac source. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

01-26-2010, 05:45 PM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	There is NO stock vacuum line run past the firewall... none. I said stupid shit because YOU posted and asked where the vac line was... I told you, then you argue that it has to be behind the dash because that's where the hissing is... THEN you admit to having put a vacuum line behind the dash yourself... And now you try and twist everything I said about the noise possibly coming from the stock gauge and you seemingly ignore the part about diagnosing your mechanical gauge (the diaphragm is in YOUR gauge, if it holds pressure, you test the hose next)????? No worries though. I haven't the patience for this right now, so I'll step aside. Good luck with the problem. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
Sequential Turbo Question	suprapoweredsoarer	MKIV Supra	1	06-06-2006 12:13 AM

01-25-2010, 05:27 AM	#2
916MKIIIx2 3" Exhaust Join Date: Nov 2008 Location: California Posts: 152	I'm not too sure about the stock boost sensor, but if it does have a vacuum line that runs to the gauge then that could have come undone from the gauge itself. I had this happen to me on my aftermarket boost gauge.