Turbo charger on ebay

Green7mgte · 02-03-2010, 05:26 AM

Hi. just wondering if you guys can give some feedback on this. just casually surfing the internet and found a to good to be true offer for a t4 turbo charger. just trying to figure whats up..
http://cgi.ebay.com/ebaymotors/ws/eB...id=p2759.l1259

Bill UK · 02-03-2010, 09:54 PM

As you said, too good to be true, even though the P& P is the same price as the Turbo, also no mention of the waste gate, which is not big issue providing the stock one is easy, fitted. I think I would contact some of the other buyers that have bought turbo`s from this seller. Looking at the feed back history there are few turbo`s, but none exactly the same as this listing, still worth contacting some of the previous buyers to see what they think. Probably imported from China, so difficult to make a judgment without a brand name. Also, no mention of any warranty? General rule though, you get what you pay for.

Bill UK · 02-03-2010, 10:38 PM

It’s the same with this seller Link they are listed as item located United Kingdom, but they are despatched direct from Taiwan (why don`t they say) . Difficult to make a judgment on the quality without feed back from other buyers. Even then they could be ok for a year, then fail big time at high speed.

two-step-n · 02-04-2010, 12:43 AM

there no good plus its a 1.15a/r turbine

MalumInSe · 02-08-2010, 11:38 PM

I don't really want to start a new thread because my question also deals with ebay

Any views on the generic intercoolers available?

Green7mgte · 02-09-2010, 02:13 AM

shoot I was going to get one. with the pipes included. the BOV they provide is usually junk. but you can get a front mount intercooler with the pipes for under 200. just look at the type.. Tube N fin. bars n plates. decide which one is best and go for it. the mounting is an issue and so is the pipe routing. be prepared to relocate the oil cooler and cut your own pipes and probably a few holes for the pipes. but other then that. I don't see any draw backs.

MalumInSe · 02-09-2010, 07:13 AM

I figured the bov would be junk.

I'm not really worried about modifying anything to make it fit. I have a few different welders and can bend pipe if needed, as well as fabricate brackets. I just can't justify spending 1200 on some fancy kit when you can piece together the kit for less. My only issue was finding an intercooler that owuld fit

Green7mgte · 02-09-2010, 11:51 AM

If I had that at my ready disposal It would of been done on my car by now.
good luck.

El Supracabras · 02-20-2010, 05:12 AM

I bought a cx racing intercooler with 2.5" hardpipe kit(no bov)off ebay for my 89. Took 10 days to ship and cost $300 after the "make an offer" option. Listed as "bolt on",although not even one bolt did,it really wasn't that bad to install. Its way bigger than stock (also heavier) and looks 100 times better. I have not gone over 8psi with it yet but no noticable press drop or leaks. Be prepared to relocate the oil cooler,steering cooler,one horn,and some plastic. Quality can be described as decent especially considering the price. The aluminum piping kit was very nice although the tabs for the breather piping are welded on crooked but imo this was a good deal. Its not an HKS or Spearco but I only paid what shipping and taxes cost for one of those and I got the hard pipes.
Hope that helps someone. I'm looking at the "popularly priced" t-61 turbo on ebay myself. It at least looks worth the price..... soon.

97SupraTT · 02-20-2010, 11:08 AM

Quote:

Originally Posted by Bill UK

As you said, too good to be true, even though the P& P is the same price as the Turbo, also no mention of the waste gate, which is not big issue providing the stock one is easy, fitted. I think I would contact some of the other buyers that have bought turbo`s from this seller. Looking at the feed back history there are few turbo`s, but none exactly the same as this listing, still worth contacting some of the previous buyers to see what they think. Probably imported from China, so difficult to make a judgment without a brand name. Also, no mention of any warranty? General rule though, you get what you pay for.

I agree, you get what you pay for. It might seem like good quality, but then it might not last as long before it starts falling apart. You wont know that till it happens. oh, im not just talking about the turbo but the FMIC too. Good luck.

02-03-2010, 05:26 AM	#1
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	Turbo charger on ebay Hi. just wondering if you guys can give some feedback on this. just casually surfing the internet and found a to good to be true offer for a t4 turbo charger. just trying to figure whats up.. http://cgi.ebay.com/ebaymotors/ws/eB...id=p2759.l1259 __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

02-03-2010, 09:54 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	As you said, too good to be true, even though the P& P is the same price as the Turbo, also no mention of the waste gate, which is not big issue providing the stock one is easy, fitted. I think I would contact some of the other buyers that have bought turbo`s from this seller. Looking at the feed back history there are few turbo`s, but none exactly the same as this listing, still worth contacting some of the previous buyers to see what they think. Probably imported from China, so difficult to make a judgment without a brand name. Also, no mention of any warranty? General rule though, you get what you pay for. Last edited by Bill UK; 02-03-2010 at 09:58 PM.

02-09-2010, 02:13 AM	#6
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	shoot I was going to get one. with the pipes included. the BOV they provide is usually junk. but you can get a front mount intercooler with the pipes for under 200. just look at the type.. Tube N fin. bars n plates. decide which one is best and go for it. the mounting is an issue and so is the pipe routing. be prepared to relocate the oil cooler and cut your own pipes and probably a few holes for the pipes. but other then that. I don't see any draw backs. __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

02-09-2010, 11:51 AM	#8
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	If I had that at my ready disposal It would of been done on my car by now. good luck. __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
Sequential Turbo Question	suprapoweredsoarer	MKIV Supra	1	06-06-2006 12:13 AM

02-03-2010, 10:38 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	It’s the same with this seller Link they are listed as item located United Kingdom, but they are despatched direct from Taiwan (why don`t they say) . Difficult to make a judgment on the quality without feed back from other buyers. Even then they could be ok for a year, then fail big time at high speed.

02-04-2010, 12:43 AM	#4
two-step-n 3" Exhaust Join Date: Oct 2009 Location: mesa az Posts: 51	there no good plus its a 1.15a/r turbine

02-08-2010, 11:38 PM	#5
MalumInSe Stock Join Date: Jan 2010 Location: Ca Posts: 17	I don't really want to start a new thread because my question also deals with ebay Any views on the generic intercoolers available?

02-09-2010, 07:13 AM	#7
MalumInSe Stock Join Date: Jan 2010 Location: Ca Posts: 17	I figured the bov would be junk. I'm not really worried about modifying anything to make it fit. I have a few different welders and can bend pipe if needed, as well as fabricate brackets. I just can't justify spending 1200 on some fancy kit when you can piece together the kit for less. My only issue was finding an intercooler that owuld fit

02-20-2010, 05:12 AM	#9
El Supracabras 3" Exhaust Join Date: Feb 2010 Location: Chicago Posts: 240	I bought a cx racing intercooler with 2.5" hardpipe kit(no bov)off ebay for my 89. Took 10 days to ship and cost $300 after the "make an offer" option. Listed as "bolt on",although not even one bolt did,it really wasn't that bad to install. Its way bigger than stock (also heavier) and looks 100 times better. I have not gone over 8psi with it yet but no noticable press drop or leaks. Be prepared to relocate the oil cooler,steering cooler,one horn,and some plastic. Quality can be described as decent especially considering the price. The aluminum piping kit was very nice although the tabs for the breather piping are welded on crooked but imo this was a good deal. Its not an HKS or Spearco but I only paid what shipping and taxes cost for one of those and I got the hard pipes. Hope that helps someone. I'm looking at the "popularly priced" t-61 turbo on ebay myself. It at least looks worth the price..... soon.