02-08-2010, 03:52 AM | #1 |
Stock
Join Date: Jan 2010
Location: elkhart in
Posts: 24
|
need intake
I pulled my intake off to change the filter and the holes where the lines hook into it riped out where can i find a aftermarket one that doesnt cost an arm n a leg thanks i looked all over but no luck
|
02-09-2010, 12:21 AM | #2 |
Stock
Join Date: Jan 2010
Location: elkhart in
Posts: 24
|
I take it none of u have a intake
|
02-09-2010, 02:16 AM | #3 |
Supra Forum Moderator
Join Date: Nov 2009
Location: Green-Ohio
Posts: 1,297
|
what lines? are you talking about stripping the intake filter box? can you post a picture I don't know what your talking about. sorry
__________________
92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines : |
02-10-2010, 01:10 AM | #4 |
3" Exhaust
Join Date: Mar 2009
Location: raleigh
Posts: 138
|
take a pic?
|
02-12-2010, 12:24 AM | #5 |
Stock
Join Date: Jan 2010
Location: elkhart in
Posts: 24
|
My camera isnt working but the stock intake is gone it the part of the recirculater valve hooks up i just need a intake
|
02-12-2010, 01:28 AM | #6 | |
Supra Forum Moderator
Join Date: Nov 2009
Location: Green-Ohio
Posts: 1,297
|
Quote:
go to this sight. click on the engine compartment links and tell me exactly what your talking about.. are you referring to the Accordion hose? that your stock Blow off valve connects to? the rubber piece that connects to your MAF? which in-turn connects to your air intake filter.. im seriously lost. your EGR valve. (exhaust gas Recirculation valve) is near your intake manifold. between your valve covers. please point and tell me what you need.
__________________
92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines : |
|
02-12-2010, 02:01 AM | #7 |
Stock
Join Date: Jan 2010
Location: elkhart in
Posts: 24
|
Bov where it hooks to the intake tube and whats that cps does that spin and what does it do my cap is broke on it if thats it and thank u for that pic to help me
|
02-12-2010, 02:09 AM | #8 |
Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
|
Ah... you mean what's commonly referred to as the accordion hose or pipe. Do a search for that, someone posted recently that they found one for pretty cheap from some online vendor... I'm sorry, but i can't remember who. You might also search for threads with cooleze in them, that was also mentioned in the same thread although that one is expensie.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> |
02-12-2010, 02:22 AM | #9 |
Stock
Join Date: Jan 2010
Location: elkhart in
Posts: 24
|
Ok thank u and i know what that sensor is my cap is broke on it what should i do to keep i from getting wet
|
02-12-2010, 02:36 AM | #10 |
Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
|
Accordian part number: 17882-42012 MSRP is $49 but you can get it for less from www.toyotaworld.com... they're a Toyota dealership out of Texas. Still I think someone posted one they found for closer to $30. Verify that the part you need is the accordion... it's shown here and labeled 17886B
The CPS cover is available from Toyota. Part number: 19121-42010 and you should replace the seal as well: 19127-42010 Fortunately, these arts are both inexpensive.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intake Question | EvilDragun | MKIII Supra | 18 | 04-15-2008 04:05 AM |
Cleaning Intake & Injectors | mrnickleye | Supra FAQ | 6 | 03-23-2007 04:26 AM |
5mge intake manifold upgrade | Allen Crump | Non-Generation Specific Questions | 1 | 11-02-2006 01:53 AM |
intake manifold has coolant what did i do wrong? | 91toy supra | MKIII Supra | 6 | 09-16-2006 02:46 PM |
custom intake manifold | j3pz | MKIII Supra | 8 | 12-07-2005 06:23 PM |