87 non turbo drove then died now no spark
 

so i jus swaped my motor out for another one ran fine was driving it 2 days later and it jus dies had it towed home i checked it and theres no spark i changed the igniter still no spark i changed the coil still no spark i changed the distributor still no spark i checked the timeing belt its good i checked the wireing with ome meter and it check out ok checked all fuses there all fine im really at a loss here and about out of money any ideas what could be wrong?????:confused::confused::confused::confused: :(:(:(:confused::confused::confused:

Punctuation and grammar go a long way toward clearly communicating your needs... people (including me) are more likely to stop and read your post if it's a quick, easy and concise read than just skip it (like I have the past couple times I've checked in today).



Have you tested for power at the ECU? Leads B+, B1+ and BATT should all have 12v with the ignition in the on position. Check the grounds on both sides of the head; one set connects on the exhaust side near the throttle linkage assembly and the other group connect to the lower intake plenum near the starter.