|
|
03-05-2010, 06:41 AM
|
#1 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
  |
The heads are the same, the cooler is capped though, IIRC. The EGR modulator port should be covered too though.
So, what were the NOx results? Have you by chance looked to see if the ECU is USDM or JDM? I'm curious and would like to know more. I'm not sure if it's the same situation with JDM GTE intakes, but the GE's intake doesn't have any of the porting for the EGR. To add EGR to a JDM 7M-GE you have to swap over the upper USDM intake plenum/surge tank and the USDM "Y" pipe. I suspect that you would need a USDM upper intake plenum/tank along with the cooler plate and the modulator. The wiring may vary a little too, but I am unsure. Have you checked for error codes? Checked anything Mirage suggested?
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ABS Problem? | rasclaat_98 | MKIII Supra | 6 | 12-13-2010 09:53 PM |
| speed sensor problem | nadircicek | Non-Generation Specific Questions | 8 | 10-09-2009 05:58 PM |
| electrical problem! I think!!!!!help!! | Boostcrazy61 | MKII Supra | 0 | 08-21-2009 12:08 AM |
| another heater problem | nicnet | MKIII Supra | 16 | 12-05-2007 10:18 PM |
| Nissan Sentra Tranny problem. | redmaro | Off Topic Forum | 2 | 11-28-2006 01:58 PM |
Hybrid Mode
