Bought an 88 supra non-turbo HELP

Supra Saiyan · 02-28-2010, 10:56 PM

I am looking into a few mods on the car. So far everything is good, I will be taking it in for a complete tune up!
I have seen a few turbo out there and started noticing it looks like the kits (Greddy and such) seem to come with a new intake option. Is this true? Can I even have this put on the normal 7m engine? I will most likely need to have a professional tuning shop put it in as well right? Maybe I will need to purchase something additional to help get the ecu tuned to the correct settings? Anyone out there who has done this or knows about the direction I would need/be going. HELP please..

ps- im sure I would need fuel upgrades and to replace the gasket and such first..? Right? Anyone toss out prices I should expext to pay for the mods and maybe even installation. Seems like $50 an hour around the Portland area.

907mge · 03-01-2010, 12:11 AM

you would probably want to put a 7mgte in it or just buy a turbo model, but the main thing is to do alot of research before throwing alot of money into it

Supra Saiyan · 03-01-2010, 12:20 AM

Wouldn't it just be cheaper rebulid my exsisting engine and then turbo it? Is it not possible to turbo the 7m? I would want to upgrade the turbo from stock even if I had the 7mt. I have done tons of research and started to wonder if it was even possible to turbo the 7m.. I mean I do see the greddy kits..

Maybe I should have put my intentions for the car..

I want 300 - 350 hp.. This should be easy with a 3000cc engine. Especially with a turbo kit equip and tuned correctly. I am looking into an engine rebuild kit to help get me out of this 170k engine. Obviously I would upgrade the fuel and exhaust system. I am just looking for real recommendations on how to get where I am trying to go.

907mge · 03-01-2010, 01:10 AM

the gte is different than the ge in some ways such as pistons and compression, it would be easier to get a jdm 7mgte or swap in a 1jz, the 2.5l twin turbo, it isn't that hard to do but if your not doing it yourself, meaning paying someone it will cost you some pretty good money either path you choose, plus be concerned with all the other parts of the car such as suspension, steering, tranny, diff, etc depending on how many miles are on the car, the car is old

907mge · 03-01-2010, 01:16 AM

also check your rear wheel wells for rust, it likes to hide back there under the undercoating, i found it the hard way

Supra Saiyan · 03-01-2010, 01:26 AM

I don't want to irritate you. I get what your saying about a new engine and such but I am not big into doing a j swap or anything besides MAYBE the turbo version of the engine. When I priced out some kits for the 7m engine I found a A kit that had Titanmotorsports 1.4mm/2.0mm metal head gasket along with ARP head studs/bolts, plus Eagle H-beam forged connecting rods, Wiseco pistons, along with Clevite 77 Main and Rod bearings.. With all of that I would think that it would be clean enough to turbo. Plus it's like new.
See I keep thinking I would have to buy some other engine to swap in and then have to rebuild it too.. So I keep thinking its cheaper to rebuild my 7m and turbo it with a greddy or something.

Yes yes, thanks for talking about suspension. I have questions about that one later.. I mean i'm not trying to be a track star or anything but I would like to groove around a corner or two here and there..

The rust thing.. Wow, I didn't even think of that there.. What happened to yours. I mean what was the hard way? The stories are always interesting to hear.

Supra Saiyan · 03-01-2010, 01:50 AM

Ok this is what I found.. So is it truly going to be better this route.. I can get this from jdm engine corp. for $2100. Engine, transmission, everything.. Is this truly going to be better for me. I also want to maintain balance on the car. If you say somthing about doing a 1jz then please let me know about the weight differences and if I will need anything... EXTRA.. I mean is it a direct swap, you know.. Somthing simple. I have a guy who could do the complete swap in 2 days for $600. Remember folks, I want direction.. So help me out please.. I will keep looking for more info too.

Used Imported JDM 7M-GTE Turbo 3.0L V6 Toyota Supra 1986 - 1992 Engine & 5 Speed Transmission Swap !

Your Swap Includes The Following:

Block
Head
Turbo
Intake Manifold
Complete Head
Sensors
Exhaust Manifold
Fuel Rail
Injectors
Throttle Body
Alternator
Starter
Power Steering Pump
Engine
5 Speed Transmission
ECU
Wiring

02-28-2010, 10:56 PM	#1
Supra Saiyan 3" Exhaust Join Date: Feb 2010 Location: Oregon Posts: 225	88 supra N/A (SWAP, or ADD TURBO) I am looking into a few mods on the car. So far everything is good, I will be taking it in for a complete tune up! I have seen a few turbo out there and started noticing it looks like the kits (Greddy and such) seem to come with a new intake option. Is this true? Can I even have this put on the normal 7m engine? I will most likely need to have a professional tuning shop put it in as well right? Maybe I will need to purchase something additional to help get the ecu tuned to the correct settings? Anyone out there who has done this or knows about the direction I would need/be going. HELP please.. ps- im sure I would need fuel upgrades and to replace the gasket and such first..? Right? Anyone toss out prices I should expext to pay for the mods and maybe even installation. Seems like $50 an hour around the Portland area. Last edited by Supra Saiyan; 08-16-2010 at 07:59 AM.

03-01-2010, 12:20 AM	#3
Supra Saiyan 3" Exhaust Join Date: Feb 2010 Location: Oregon Posts: 225	Wouldn't it just be cheaper rebulid my exsisting engine and then turbo it? Is it not possible to turbo the 7m? I would want to upgrade the turbo from stock even if I had the 7mt. I have done tons of research and started to wonder if it was even possible to turbo the 7m.. I mean I do see the greddy kits.. Maybe I should have put my intentions for the car.. I want 300 - 350 hp.. This should be easy with a 3000cc engine. Especially with a turbo kit equip and tuned correctly. I am looking into an engine rebuild kit to help get me out of this 170k engine. Obviously I would upgrade the fuel and exhaust system. I am just looking for real recommendations on how to get where I am trying to go. Last edited by Supra Saiyan; 03-01-2010 at 12:25 AM.

03-01-2010, 01:50 AM	#7
Supra Saiyan 3" Exhaust Join Date: Feb 2010 Location: Oregon Posts: 225	If I did a engine swap.. Ok this is what I found.. So is it truly going to be better this route.. I can get this from jdm engine corp. for $2100. Engine, transmission, everything.. Is this truly going to be better for me. I also want to maintain balance on the car. If you say somthing about doing a 1jz then please let me know about the weight differences and if I will need anything... EXTRA.. I mean is it a direct swap, you know.. Somthing simple. I have a guy who could do the complete swap in 2 days for $600. Remember folks, I want direction.. So help me out please.. I will keep looking for more info too. Used Imported JDM 7M-GTE Turbo 3.0L V6 Toyota Supra 1986 - 1992 Engine & 5 Speed Transmission Swap ! Your Swap Includes The Following: Block Head Turbo Intake Manifold Complete Head Sensors Exhaust Manifold Fuel Rail Injectors Throttle Body Alternator Starter Power Steering Pump Engine 5 Speed Transmission ECU Wiring

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1990 Supra Turbo -Any Good!!?	ukferrari	MKIII Supra	3	12-13-2009 09:13 PM
what do you think of this setup?	Jareduhhhh	MKIV Supra	4	02-19-2009 10:38 AM

03-01-2010, 12:11 AM	#2
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	you would probably want to put a 7mgte in it or just buy a turbo model, but the main thing is to do alot of research before throwing alot of money into it

03-01-2010, 01:10 AM	#4
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	the gte is different than the ge in some ways such as pistons and compression, it would be easier to get a jdm 7mgte or swap in a 1jz, the 2.5l twin turbo, it isn't that hard to do but if your not doing it yourself, meaning paying someone it will cost you some pretty good money either path you choose, plus be concerned with all the other parts of the car such as suspension, steering, tranny, diff, etc depending on how many miles are on the car, the car is old

03-01-2010, 01:16 AM	#5
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	also check your rear wheel wells for rust, it likes to hide back there under the undercoating, i found it the hard way

03-01-2010, 01:26 AM	#6
Supra Saiyan 3" Exhaust Join Date: Feb 2010 Location: Oregon Posts: 225	I don't want to irritate you. I get what your saying about a new engine and such but I am not big into doing a j swap or anything besides MAYBE the turbo version of the engine. When I priced out some kits for the 7m engine I found a A kit that had Titanmotorsports 1.4mm/2.0mm metal head gasket along with ARP head studs/bolts, plus Eagle H-beam forged connecting rods, Wiseco pistons, along with Clevite 77 Main and Rod bearings.. With all of that I would think that it would be clean enough to turbo. Plus it's like new. See I keep thinking I would have to buy some other engine to swap in and then have to rebuild it too.. So I keep thinking its cheaper to rebuild my 7m and turbo it with a greddy or something. Yes yes, thanks for talking about suspension. I have questions about that one later.. I mean i'm not trying to be a track star or anything but I would like to groove around a corner or two here and there.. The rust thing.. Wow, I didn't even think of that there.. What happened to yours. I mean what was the hard way? The stories are always interesting to hear.