THIS!! This is exactly what I needed to see.. Ok, now for me to find some prices and go for the goal.. I had searched the forum for my own answers but everything seemed so jumbled in my brain..

:rofl::rofl::rofl::rofl::rofl::rofl:
:dance::dance::dance::dance::dance:

depending on were you get your parts from. the most expensive thing on that list would be the injectors. then the exhaust. or vice verse.
http://www.toyota-supra.info/forums/...t-a-supra.html
that link talks about upgrades and gives some just random pricing on injectors to give you a feel for whats expected. you might as well throw on a 3" turbo elbow and exhaust header to that list. if your gonna do something, might as well do it right.

im trying to build my 7mgte i got it with a ported and polished head, 3" downpipe, full exhaust and an extra block thats .20 over. i want to have it bored another .20 over and im going to have the valves bored 1mm over 1mm=.40 over im doing brian crower stage 3 cams, valve springs, and valves with a stroker kit forged pistons h beam rods,hi flow fuel rail , 550 or 650 cc injectors a 71 trim turbo or a twin turbo setup not sure on the turbo set up.my rough guess on power is about 450 to 600 running on 93 pump gas

I recommend against boring these blocks unless it's necessary. There's not a lot of meat to the walls and you can make up the difference in power with a VERY small increase in boost.