![]() |
Quote:
im just trying to be 100% about this, thanks tho |
Quote:
|
Quote:
A large amount of what you're looking for a is very commonly discussed and very easy to locate... why should they have to keep digging up stuff from this forum just to repeat it? A little self-sufficience will get you in a lot better with the locals. ;) Just a tip. |
Quote:
ill keep the look out for the parts, i guess what im asking for is, i dont wanna miss parts... soo heres my list so far w58 tranny bellhousing...(is that for a particular motor?) clutch master cyl slave master clutch and brake pedals, stick shifter my auto ecu would work fine am i correct? and anything else? i looked and people listed parts but seemed to small for the actually swap, so i just wanna be sure, and with your guys knowledge(more then mine) i can make that happen :) |
Yes, bell housing is both engine and transmission specific. The bell housing from either a 7M equipped Cressida or N/A Supra will work. You also need a 7M-GE flywheel and I believe the starter needs to be changed... IIRC that is. The front half of the drive shaft is different. You'll need a shifter, boot and I think the interior bezel is different.
|
Quote:
he knows a guy that sells the flywheel, clutch master and acouple other peices i cant remember... hope to get the tranny, but not gonna do the swap for a while haha :rant2: |
All times are GMT. The time now is 08:08 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.