09-10-2005, 03:12 AM | #1 |
3" Exhaust
Join Date: Aug 2005
Posts: 193
|
Fog Lights???????
Does anyone know how to rewire the fog lights so they turn on alone without the headlights. Somebody please help i see soo many on car domain with just the fogs on and it pisses me off cuz i can't figure out how they make it work?
|
09-10-2005, 06:33 AM | #2 |
12psi boost
Join Date: Jul 2005
Posts: 348
|
Here I come to save the day!!
I to was trying to figure out how to do it, as I couldn't access the supraforums where I KNOW there is a list of mods that are cheap (fog light mod included) I went looking everywhere else. Someone gave me the link to shimming my wastegate..and from there, I found out how to do it. Here's the link to the contents, as the FAQS to doing it are year specific. http://www.supras.com/06/techcenter/...5414c12a8f69c8 |
09-10-2005, 10:34 AM | #3 |
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
|
and ours do that stock
buahahahahahaa JDM TYTE YO!
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first! |
09-11-2005, 04:45 AM | #4 |
Lexus & 550's
Join Date: Aug 2005
Location: In the shadows
Posts: 506
|
nice link
[QUOTE=Poodles]Here I come to save the day!!
awsome supra mod/fix page. thxs poodles |
09-11-2005, 05:52 AM | #5 |
12psi boost
Join Date: Jul 2005
Posts: 348
|
Bah, JDM is great...they keep all the good stuff for themselves, like the cooler brake lights, mirrors, CARS (WHERE IS MY SKYLINE?!??!), ect...
I'd love to see the Skylines come over here and really shut these AMERICAN POWER people up. I'm so sick of being called a "ricer," especially after I make them look stupid light to light... |
09-13-2005, 08:42 PM | #6 |
3" Exhaust
Join Date: Aug 2005
Posts: 193
|
Can anybody sum up on how to rewire that stuff, i installed a remote start system on my supra and there are soo many wires down there under the dash!!!! I'm lost. Where is the f/l relay located anyway. In those directions it says tape off the dash side, in other words just tape it off and its not gonna be used anymore right? Also when they say ( I used the bottom side of the Tail fuse). Which fuse is that? Somebody help, i'm sure u guys have done this before.
|
09-15-2005, 09:36 PM | #7 |
Lexus & 550's
Join Date: Aug 2005
Location: In the shadows
Posts: 506
|
driving lights
actually mine did not work at all when i got my car and i had to take the driving light switch apart and clean the contacts, then looking at it all i did was solder on a jumper piece of brass to modify what get powered by the toggle bar inside the switch. so now when i turn on parking lights, i can run driving lights too or just driving lights, and when i turn on headlights the drivers lights go off. then if i turn my headlights on hi beam they automatically turn on driver lights. or i can flip the switch and they will come on with low beam and go off with hi beam. not sure what its supposed to do stock, but i like this setup. if you want i can take a picture of what i did to the switch inside?
just ask.. Last edited by joel williams; 09-15-2005 at 09:42 PM. Reason: typo error |
09-16-2005, 03:25 AM | #8 |
3" Exhaust
Join Date: Aug 2005
Posts: 193
|
If u can i'd appreciate it, i don't know if it makes a difference between the 88 model and the 89 cuz mine is a 88
|
09-16-2005, 04:07 AM | #9 |
12psi boost
Join Date: Jul 2005
Posts: 348
|
Mine come on as long as the key is on, I use em as DRL's
|
09-16-2005, 05:14 AM | #10 |
Lexus & 550's
Join Date: Aug 2005
Location: In the shadows
Posts: 506
|
piks
ok now that i have it apart i think it would be easier to just jumper the top two wires together instead of pulling the switch apart but i am not 100 percent sure. here is the best pik i can offer. its the back of the switch and the odd color brass on the top right corner is the piece i added. it basically conects the top two terminal or wires together. if you do take the switch apart, be carefull not to lose the spring and ball bearing in the opposite side. let me know if this help ya
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My brake lights are stuck on. wtf! | Isphius | MKIII Supra | 16 | 09-07-2009 08:48 PM |
LF: Lightbulbs guide | lamw001 | MKIV Supra | 2 | 09-18-2008 02:23 PM |
Brake lights not working! | lifesnotfair | MKIII Supra | 18 | 05-05-2008 11:40 PM |
Dash lights and Side marker lights are not working | ebang | MKIII Supra | 0 | 04-01-2008 12:35 PM |
tail lights out need help! | supraman121 | MKIII Supra | 5 | 12-21-2006 09:16 PM |