&M-GTE head on the 7M-GE

Sonyps307 · 10-20-2010, 04:35 AM

I'm guessing u can put the swap in vortex I don't know but if the cams have more lift and longer Duration more air flow

Brain crower cams

Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Dyno Shop Status

Street/Strip Specification
Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.

Duration Lift
BC0321 264°/264° 220°/220° .336"/.336" 8.53/8.53 BC0320

Race Specification
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0320.

BC0322 272°/272° 226°/226° .342"/.342" 8.68/8.68 BC0320

USDM 7MGTE (’87-’92 MKIII) Stock

256°/256° 201°/201° .297"/.297" 7.54/7.54

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket?	BillW	MKIII Supra	5	09-17-2010 02:06 AM
Head skim requirement?	MA70-3.0GT	MKIII Supra	11	12-15-2009 06:03 PM
replacing the head and headgasket	skadaloz	MKIII Supra	4	04-13-2009 11:54 PM
Fel-Pro Head Gasket for Stock 1990 Turbo Engine	Benesesso	MKIII Supra	5	03-10-2006 10:52 PM

10-20-2010, 04:35 AM	#1
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	I'm guessing u can put the swap in vortex I don't know but if the cams have more lift and longer Duration more air flow Brain crower cams Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Dyno Shop Status Street/Strip Specification Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK. Duration Lift BC0321 264°/264° 220°/220° .336"/.336" 8.53/8.53 BC0320 Race Specification Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0320. BC0322 272°/272° 226°/226° .342"/.342" 8.68/8.68 BC0320 USDM 7MGTE (’87-’92 MKIII) Stock 256°/256° 201°/201° .297"/.297" 7.54/7.54