windshield washer reservoir & nozzles

bassboy3313 · 10-24-2010, 03:38 AM

Hey. I am wondering where the windshield washer reservoir is located? I do not see one under the hood and I also dont see washer nozzles on the hood whatsoever. I have an 89 supra turbo. Anyone have an idea? Thanks!

91ma70 · 10-24-2010, 05:49 AM

It should be on the right side near the right pop-up headlight (drivers seat perspective). It should have a white symbol which will indicate the filler cap. As for the nozzles, there should be two plastic looking nubs that protrude from the hood about 6 or so inches away from the windshield. these items should be obvious to notice but since you have a turbo, maybe the previous owner removed them for weight reduction (stupidly)?

bassboy3313 · 10-24-2010, 12:58 PM

I figured they should be obvious, I mean everyone knows what the reservoir looks like and the nubs on the hood. The thing that confuses me is that there arent even any holes in the hood where the nozzles would be. If the previous owner removed this system, then they must have spent a pretty penny removing the nozzles and filling in the holes. Now the question is, how do I put this system back in? lol.

907mge · 10-24-2010, 04:00 PM

Is it a factory hood?

bassboy3313 · 10-24-2010, 08:18 PM

yeah it is. OH WOW!!! They went through some trouble to bondo the holes shut and remove everything. I hope the washer pump harness is still there. I can just put it all back in. Is it common for people to relocate the washer reservoir to fit the FMIC piping? I'm just thinking on what i can do if the FMIC piping is in the way. Any input would be nice.

907mge · 10-24-2010, 08:38 PM

I guess they didn't really intend the car for the road. I don't know about where you are, but here in PA that is a inspection must. If you need them then you are going to have to get the squirters and install them or get another hood. And if the wires aren't there it probably would not be too hard to get what you need used. But as far a where to put the tank that is a question.

bassboy3313 · 10-24-2010, 08:45 PM

no its not a thing where you must have them. I just like having them for winter since the windshield can get dirty from car ahead spraying up that dirty melting snow water. on with the hunt for windshield washer parts. lol.

shamh9s · 05-24-2015, 01:23 AM

Where can I find the Windshield Washer Pump on a 92 Toyota Supra Turbo mine is not making any noise when I try to use it so I am assuming the pump is not working and would like to change it, also any help on how to replace it will be appreciated.

10-24-2010, 03:38 AM	#1
bassboy3313 Stock Join Date: Oct 2010 Location: Wisconsin Posts: 27	windshield washer reservoir & nozzles Hey. I am wondering where the windshield washer reservoir is located? I do not see one under the hood and I also dont see washer nozzles on the hood whatsoever. I have an 89 supra turbo. Anyone have an idea? Thanks!

05-24-2015, 01:23 AM	#8
shamh9s Stock Join Date: May 2015 Location: Queens NY Posts: 1	windshield washer pump 92 Toyota Supra Turbo Where can I find the Windshield Washer Pump on a 92 Toyota Supra Turbo mine is not making any noise when I try to use it so I am assuming the pump is not working and would like to change it, also any help on how to replace it will be appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Fluid Reservoir	igosaur	MKIII Supra	2	06-28-2007 10:55 AM

10-24-2010, 05:49 AM	#2
91ma70 3" Exhaust Join Date: Feb 2010 Location: Irvine/Lancaster CA Posts: 61	It should be on the right side near the right pop-up headlight (drivers seat perspective). It should have a white symbol which will indicate the filler cap. As for the nozzles, there should be two plastic looking nubs that protrude from the hood about 6 or so inches away from the windshield. these items should be obvious to notice but since you have a turbo, maybe the previous owner removed them for weight reduction (stupidly)?

10-24-2010, 12:58 PM	#3
bassboy3313 Stock Join Date: Oct 2010 Location: Wisconsin Posts: 27	I figured they should be obvious, I mean everyone knows what the reservoir looks like and the nubs on the hood. The thing that confuses me is that there arent even any holes in the hood where the nozzles would be. If the previous owner removed this system, then they must have spent a pretty penny removing the nozzles and filling in the holes. Now the question is, how do I put this system back in? lol.

10-24-2010, 04:00 PM	#4
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	Is it a factory hood?

10-24-2010, 08:18 PM	#5
bassboy3313 Stock Join Date: Oct 2010 Location: Wisconsin Posts: 27	yeah it is. OH WOW!!! They went through some trouble to bondo the holes shut and remove everything. I hope the washer pump harness is still there. I can just put it all back in. Is it common for people to relocate the washer reservoir to fit the FMIC piping? I'm just thinking on what i can do if the FMIC piping is in the way. Any input would be nice.

10-24-2010, 08:38 PM	#6
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	I guess they didn't really intend the car for the road. I don't know about where you are, but here in PA that is a inspection must. If you need them then you are going to have to get the squirters and install them or get another hood. And if the wires aren't there it probably would not be too hard to get what you need used. But as far a where to put the tank that is a question.

10-24-2010, 08:45 PM	#7
bassboy3313 Stock Join Date: Oct 2010 Location: Wisconsin Posts: 27	no its not a thing where you must have them. I just like having them for winter since the windshield can get dirty from car ahead spraying up that dirty melting snow water. on with the hunt for windshield washer parts. lol.