Transmission rant, help! Need advice or anything, asap - Page 10

ochowdero · 03-26-2011, 11:07 PM

what are all of these?

Travis89Turbo · 03-27-2011, 12:00 AM

The plug is your reverse switch. and the other threaded hole on pass. Side by the tail piece is for the speedo

crazysuprafinatic18 · 03-28-2011, 03:30 AM

Idk if you have already decided to do whatever it is you were going to do. I think the easiest thing to do is to get the car up on four jack stands, makes things a lot simpler. Then get the jack under the tranny and take the bolts off and the couple connections and that's about it for taking it off.

crazysuprafinatic18 · 03-28-2011, 03:31 AM

Ooops maybe should have kept going through the post. Sorry I was a little late aha

ochowdero · 03-28-2011, 04:15 AM

Quote:

Originally Posted by Travis89Turbo

The plug is your reverse switch. and the other threaded hole on pass. Side by the tail piece is for the speedo

so when i do the swap the speedo cable screws on and the reverse lights are the only to things i need for the swap? is there any other cables or plugs?

cre · 03-28-2011, 07:23 AM

Quote:

Originally Posted by crazysuprafinatic18

Idk if you have already decided to do whatever it is you were going to do. I think the easiest thing to do is to get the car up on four jack stands, makes things a lot simpler.

The additional room is very nice but this can be a lethal suggestion unless additional efforts are in place. I recommend placing the car's wheels or another different under the frame and floorboard if you don't have wheels to use then put each on top of two parallel pieces of 2x4. Try to get them tall enough to leave only and in or two of clearance on top.

ochowdero · 03-28-2011, 08:28 AM

Quote:

Originally Posted by cre

The additional room is very nice but this can be a lethal suggestion unless additional efforts are in place. I recommend placing the car's wheels or another different under the frame and floorboard if you don't have wheels to use then put each on top of two parallel pieces of 2x4. Try to get them tall enough to leave only and in or two of clearance on top.

i use cinder blocks :P

Travis89Turbo · 03-28-2011, 07:48 PM

Quote:

Originally Posted by ochowdero

so when i do the swap the speedo cable screws on and the reverse lights are the only to things i need for the swap? is there any other cables or plugs?

Other then bypassing the park switch that's it!

ochowdero · 03-28-2011, 08:40 PM

Quote:

Originally Posted by Travis89Turbo

Other then bypassing the park switch that's it!

how do i bypass?
and when i do, do i still step on the clutch to start it?

cre · 03-29-2011, 01:15 AM

Quote:

Originally Posted by ochowdero

i use cinder blocks :P

Rims are less likely to tip.... or crumble. :P With out a lift I'm paranoid.

03-26-2011, 11:07 PM	#91
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	what are all of these? __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

03-27-2011, 12:00 AM	#92
Travis89Turbo 12psi boost Join Date: Jul 2010 Location: Utah Posts: 332	The plug is your reverse switch. and the other threaded hole on pass. Side by the tail piece is for the speedo __________________ 1995 Toyota Supra SE 71k miles. Master power T70 stock 2jzge 1989 Toyota Supra. 1jzgte swap 5 speed of course.. Driftmotion 60-1 single turbo kit. Cxracing FMIC. 2jz 550cc injectors... soon to come..... EMS Stinger. BC 264 cams 680cc injectors Spec stage 4 clutch and A LOT of boost!------SOLD 1999 Ford F350 diesel 2004 Jaguar XJR Supercharged If it hasnt broke you haven pushed it hard enough!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
86.5 auto transmission removal HELP!!!	elmer	MKIII FAQ	13	04-06-2010 10:41 PM
Should I try to rebuild my transmission, or leave it to experts?	Busted Knuckles	Non-Generation Specific Questions	1	04-15-2008 01:20 AM
Need transmission removal help ASAP	FunWheelDrive	MKIII Supra	2	03-23-2008 12:35 AM

03-28-2011, 03:30 AM	#93
crazysuprafinatic18 Stock Join Date: Oct 2010 Location: San Antonio, TX Posts: 11	Idk if you have already decided to do whatever it is you were going to do. I think the easiest thing to do is to get the car up on four jack stands, makes things a lot simpler. Then get the jack under the tranny and take the bolts off and the couple connections and that's about it for taking it off.

03-28-2011, 03:31 AM	#94
crazysuprafinatic18 Stock Join Date: Oct 2010 Location: San Antonio, TX Posts: 11	Ooops maybe should have kept going through the post. Sorry I was a little late aha