knock sensor replacement

Sonyps307 · 03-23-2011, 10:50 PM

You have to find the KS wire coming from the ECU harness. There are three ECU harnesses connected to the ECU, the one that has the KS wire is the harness in the middle, it's the only two transparent wires there on the middle harness. Even if it's not on the middle ECU harness, you should be able to find because it's the only two transparent wires out of all those three harness wires (for all MK3yrs). DO NOT cut the two wires at the harness, cut it at the furthest point away from the ECU harness (where the harness electrical tape ends and where you start to see the color wires for the first time). You should have about 5 to 6 inches of KS wire on the ECU harness after you cut at where the electrical tape ends.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rod Knock! OR is IT?	Rob1	MKIII Supra	5	03-02-2011 12:26 AM
Knock Sensor/Wiring	MarkLinRacing	MKIII Supra	2	03-23-2010 02:52 PM
87 Turbo knock sensor issue	supraman7	MKIII Supra	5	03-05-2010 07:44 PM
Starting isssues and spark knock Q's	spudz29212MKIII	MKIII Supra	65	05-30-2008 06:44 PM
Engine knock @ 1700-2300	rstutler	MKIII Supra	8	03-07-2008 07:36 PM

03-23-2011, 10:50 PM	#6
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	You have to find the KS wire coming from the ECU harness. There are three ECU harnesses connected to the ECU, the one that has the KS wire is the harness in the middle, it's the only two transparent wires there on the middle harness. Even if it's not on the middle ECU harness, you should be able to find because it's the only two transparent wires out of all those three harness wires (for all MK3yrs). DO NOT cut the two wires at the harness, cut it at the furthest point away from the ECU harness (where the harness electrical tape ends and where you start to see the color wires for the first time). You should have about 5 to 6 inches of KS wire on the ECU harness after you cut at where the electrical tape ends.