flywheel spacing

anglia evolution · 06-22-2011, 11:54 AM

can anyone help with a quick measurement? need to know the distance from the flywheel face to the back of the engine block on a 7mgte manual?

Bill UK · 06-22-2011, 09:18 PM

Not exactly what you asked for, but it may help. The distance from the mounting surface on the crank to the machined block casting is 0.800 thou.

anglia evolution · 06-23-2011, 08:32 AM

[QUOTE=Bill UK;96218]Not exactly what you asked for, but it may help. The distance from the mounting surface on the crank to the machined block casting is 0.800 thou.
thanks for checking that, i do really need the flywheel hight though. i have a r154 box going on to a mitsubishi evo engine in my anglia and need the flywheel face hight so i can get my new flywheel made.

Bill UK · 06-23-2011, 06:16 PM

Suggestion: Lots on Ebay new & used, email the sellers and ask for the diameter. I have a spare engine in my garage on an engine stand. Post the diameter and I can calculate the dimensions you need.

87hilux7mge · 06-23-2011, 08:15 PM

i believe hes talking about the distance from the bellhousing mounting surface to the friction surface of the flywheel, so he may manufacture the proper thickness flywheel. unfortunately i dont have access to my complete turbo block yet. sorry man :/

anglia evolution · 06-24-2011, 08:18 AM

Quote:

Originally Posted by 87hilux7mge

i believe hes talking about the distance from the bellhousing mounting surface to the friction surface of the flywheel, so he may manufacture the proper thickness flywheel. unfortunately i dont have access to my complete turbo block yet. sorry man :/

yes you are correct, this is the dimension i am looking for. need to get the flywheel hight right so the clutch sits in the correct place on the input shaft. help help

87hilux7mge · 06-27-2011, 08:30 PM

hopefully soon i can get some measurements for ya, sorry man, hard to believe noone else here has a turbo block n flywheel sitting around.

Bill UK · 06-27-2011, 09:02 PM

Spare engine, no flywheel.

87hilux7mge · 06-27-2011, 09:21 PM

nice bill! i agree with your choice in block paint, looks just like mine.

Bill UK · 06-27-2011, 10:13 PM

Plasti-Kote Hot Paint Link , you probably have a similar product in the US. It never totally cure’s until it has gone through a few heat cycles. The engine I have in my current Supra was painted 5 years ago and still looks as good, not as you can see much of the block.

06-22-2011, 11:54 AM	#1
anglia evolution Stock Join Date: Jun 2011 Location: midlands Posts: 4	flywheel spacing can anyone help with a quick measurement? need to know the distance from the flywheel face to the back of the engine block on a 7mgte manual?

06-23-2011, 08:15 PM	#5
87hilux7mge walbro fp Join Date: Dec 2010 Location: spokane Posts: 479	i believe hes talking about the distance from the bellhousing mounting surface to the friction surface of the flywheel, so he may manufacture the proper thickness flywheel. unfortunately i dont have access to my complete turbo block yet. sorry man :/ __________________ 87 toyota 4x4 single cab short box pickup, 7MGZE.

06-27-2011, 08:30 PM	#7
87hilux7mge walbro fp Join Date: Dec 2010 Location: spokane Posts: 479	hopefully soon i can get some measurements for ya, sorry man, hard to believe noone else here has a turbo block n flywheel sitting around. __________________ 87 toyota 4x4 single cab short box pickup, 7MGZE.

06-27-2011, 09:21 PM	#9
87hilux7mge walbro fp Join Date: Dec 2010 Location: spokane Posts: 479	nice bill! i agree with your choice in block paint, looks just like mine. __________________ 87 toyota 4x4 single cab short box pickup, 7MGZE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch/Transmission problem	mrgdm007	MKIV Supra	21	05-12-2010 12:48 AM
Partially Attach Flywheel	go.stfu	MKIII Supra	5	10-11-2007 03:06 PM
Who here is running a aluminium flywheel, or has run one?	Chambers	MKIII Supra	2	08-31-2007 06:33 PM
racing flywheel	Jeff_5_7	MKIII Supra	7	02-14-2007 04:31 AM

06-22-2011, 09:18 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Not exactly what you asked for, but it may help. The distance from the mounting surface on the crank to the machined block casting is 0.800 thou.

06-23-2011, 08:32 AM	#3
anglia evolution Stock Join Date: Jun 2011 Location: midlands Posts: 4	[QUOTE=Bill UK;96218]Not exactly what you asked for, but it may help. The distance from the mounting surface on the crank to the machined block casting is 0.800 thou. thanks for checking that, i do really need the flywheel hight though. i have a r154 box going on to a mitsubishi evo engine in my anglia and need the flywheel face hight so i can get my new flywheel made.

06-23-2011, 06:16 PM	#4
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Suggestion: Lots on Ebay new & used, email the sellers and ask for the diameter. I have a spare engine in my garage on an engine stand. Post the diameter and I can calculate the dimensions you need.

06-27-2011, 09:02 PM	#8
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Spare engine, no flywheel.

06-27-2011, 10:13 PM	#10
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Plasti-Kote Hot Paint Link , you probably have a similar product in the US. It never totally cure’s until it has gone through a few heat cycles. The engine I have in my current Supra was painted 5 years ago and still looks as good, not as you can see much of the block.