![]() |
Supra Stock Body Panels
I`m in the process of refurbishing the rear end of the Supra. I`ve dropped the rear sub-frame out & stripped it down, shot basted and powdered coated, replaced all the bushes and it’s already to be go back in. Before I proceed I would like to weld in new rear wings due to the rusty wheel arches. Unfortunately these are not available from Toyota UK anymore, are they available in the US ? Part # 61602-1B916 & 61601-1B915 (item 61612 in pic)these are the whole quarter section of the rear wing. I intended cutting most of the wheel arch out and welding it in. Appreciate any recommendations.
http://i17.photobucket.com/albums/b5...ingCapture.jpg |
Quote:
|
Thanks cre, the part #`s are for a UK model, I think the US would have a cut-out for the side repeaters, hence the different part #`s. I have 2 options: find a similar body panel from another car manufacture and modify it, or ask someone in the states to buy the body panels, cut them down to a reasonable package size (as I only need the wheel arch part and a little bit more) and ship them to UK. That price works out to be GBP 388 at today exchange rate, which is a good price considering the size of the panel.
|
Sorry to be digging up an old tread but does anyone know were I can source the following for a Supra MK3:
6140114100, 6140214100, 616011B915 and 616021B916 - that is both sills and both quarter panels. I have been searching for the last three months but no luck. Places I've tried: Japan - but I have only one contact so far - maybe someone else has a good contact? EU - Ireland and Germany US Australia Thank you for any help ... |
I didn’t have much luck myself, ended up welding in patches and using body filler. I did use the fax contact below in search of the Toyota repair manuals and received a response, which was about 12 years ago though.
http://i17.photobucket.com/albums/b5...ADDRESS2-1.jpg |
You could try this guy jon.williams@tgb.toyota.co.uk he did respond to my email request saying “ he would look in to it ” that was last year.
|
Thank you Bill. I will email those contacts.
Any other leads I could try? |
All times are GMT. The time now is 06:20 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.