mk3 supra intercooler lines leaking

2fast4u · 05-03-2012, 01:42 PM

hello whats the name of this hose so that i can order it becuase its wet and drips a little all the time. thanks heres a pic.

pandrade · 05-03-2012, 03:42 PM

its its there smaller two on the right thoes if im correct are the oil coolers soft lines, you can probably get them at advanced

2fast4u · 05-03-2012, 06:14 PM

how will i replace them or were can i get them besides the dealer

MJG · 05-03-2012, 08:24 PM

Pull the lines off and take them down to:
American hose & fittings
19830 68th Ave. South
Kent
253 872 8080
Explain to them that they are oil cooler hose and you would like replacement (bulk) hose.
They can cut them to length.

pandrade · 05-03-2012, 09:51 PM

i think if you go to any hydroulic's shop they will be able to make them for you, just explane what your needs are( as for a shop recomendation i cant help there im no where near you)

Conga1991 · 05-09-2012, 06:34 PM

Those hose lines are not for the oil cooler... they are for the power steering. If you follow where the metal pipe lines go to they should be bolted to the rack and pinion if im not mistaken.

CanadianBak'inSupra · 05-10-2012, 01:58 AM

http://www.cygnusx1.net/Supra/Librar...ection=LU&P=15
oil cooler lines. not for PS.

pandrade · 05-10-2012, 06:51 PM

i knew i wasent crazy

Conga1991 · 05-10-2012, 10:59 PM

ahh shoot! thought it was since I saw the tabs for the bolt, didnt thinks to realized that those arent clothed lines and ps doesnt have them.

05-03-2012, 01:42 PM	#1
2fast4u 3" Exhaust Join Date: Mar 2012 Location: kent washington Posts: 57 Blog Entries: 1	mk3 supra intercooler lines leaking hello whats the name of this hose so that i can order it becuase its wet and drips a little all the time. thanks heres a pic. Attached Thumbnails __________________ 2 fast 4 u

05-03-2012, 03:42 PM	#2
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	its its there smaller two on the right thoes if im correct are the oil coolers soft lines, you can probably get them at advanced __________________ 1987 7m-gte R-154, SS braided clutch line, full 3in exshaust,aluminum radiator,full throttle gen 2 whith GM 3 inch mass air flow,13lbs flywheel, and more to come

05-03-2012, 06:14 PM	#3
2fast4u 3" Exhaust Join Date: Mar 2012 Location: kent washington Posts: 57 Blog Entries: 1	mk3 supra how will i replace them or were can i get them besides the dealer __________________ 2 fast 4 u

05-03-2012, 09:51 PM	#5
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	i think if you go to any hydroulic's shop they will be able to make them for you, just explane what your needs are( as for a shop recomendation i cant help there im no where near you) __________________ 1987 7m-gte R-154, SS braided clutch line, full 3in exshaust,aluminum radiator,full throttle gen 2 whith GM 3 inch mass air flow,13lbs flywheel, and more to come

05-10-2012, 01:58 AM	#7
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	http://www.cygnusx1.net/Supra/Librar...ection=LU&P=15 oil cooler lines. not for PS. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

05-03-2012, 08:24 PM	#4
MJG 3" Exhaust Join Date: Mar 2010 Location: Washington State Posts: 125	Pull the lines off and take them down to: American hose & fittings 19830 68th Ave. South Kent 253 872 8080 Explain to them that they are oil cooler hose and you would like replacement (bulk) hose. They can cut them to length.

05-09-2012, 06:34 PM	#6
Conga1991 3" Exhaust Join Date: Jun 2009 Location: Avondale, AZ Posts: 169	Those hose lines are not for the oil cooler... they are for the power steering. If you follow where the metal pipe lines go to they should be bolted to the rack and pinion if im not mistaken.

05-10-2012, 06:51 PM	#8
pandrade 12psi boost Join Date: Mar 2011 Location: fort myers florida Posts: 345	i knew i wasent crazy __________________ 1987 7m-gte R-154, SS braided clutch line, full 3in exshaust,aluminum radiator,full throttle gen 2 whith GM 3 inch mass air flow,13lbs flywheel, and more to come

05-10-2012, 10:59 PM	#9
Conga1991 3" Exhaust Join Date: Jun 2009 Location: Avondale, AZ Posts: 169	ahh shoot! thought it was since I saw the tabs for the bolt, didnt thinks to realized that those arent clothed lines and ps doesnt have them.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mk3 supra intercooler	2fast4u	MKIII Supra	4	05-03-2012 09:49 PM
Mk3 supra leaking oil	2fast4u	MKIII Supra	16	03-18-2012 11:39 PM
87 supra brake lines	wstanek	MKIII Supra	6	05-15-2010 01:43 PM
1987 Toyota supra fuel lines	wstanek	MKIII Supra	2	05-15-2010 12:26 PM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM