Pillow ball top mounts.
 

Ok so I got all new suspension parts springs, shocks, upper and lower ball joints and bushings all around for my supra. Also will be lowering it with H&R spring with tokico blues. So the H&R's will lower the front by 1.6" and the rear by 1.3". So I'm asking will I need adjustable pillow ball top mount to get the camber back to stock so I don't get a lot of tire wear. But the problem is that I readed that the pillow balls give u harsh ride.

There's a lot of room for adjustment in the MKIII and I know a lot of people who've run significant drops that didn't need additional hardware to get the camber dialed in. I think you should try it without them first.

Ok on that note I will just get some stock replacment top mounts and save some money. The suspension on my supra look to be original beside the front struts. Lol sound like I got basket balls in the rear when hitting bumps fast.