What rings should I get? - Page 2

icey756 · 08-12-2012, 09:39 PM

Hell this is my second time doing a HG but i dont thing we even did that the first time. We just installed a felpro the first time though. Im doing a MHG this time around. So before bolting down the head i should put FIPG on the rear timing cover where it would meet the head? Does the FIPG go between the HG and timing cover or between the HG and head? or both?

icey756 · 08-12-2012, 09:43 PM

Hmm. By looking at the TSRM posted here it seems like i would put the packing between the timing cover and block? not along the whole top of the timing cover? or just put a dab on top of the cover it just those 2 places?

icey756 · 08-12-2012, 11:02 PM

Another question i have is for the ring gaps. Does it say somewhere in the TSRM what they are suppose to be or should i be looking at my hanes manual?

08-12-2012, 09:39 PM	#11
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	Hell this is my second time doing a HG but i dont thing we even did that the first time. We just installed a felpro the first time though. Im doing a MHG this time around. So before bolting down the head i should put FIPG on the rear timing cover where it would meet the head? Does the FIPG go between the HG and timing cover or between the HG and head? or both? __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

08-12-2012, 09:43 PM	#12
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	Hmm. By looking at the TSRM posted here it seems like i would put the packing between the timing cover and block? not along the whole top of the timing cover? or just put a dab on top of the cover it just those 2 places? __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

08-12-2012, 11:02 PM	#13
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	Another question i have is for the ring gaps. Does it say somewhere in the TSRM what they are suppose to be or should i be looking at my hanes manual? __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
putting in new piston rings	johnvin	MKIII Supra	12	05-07-2011 07:22 PM
piston rings which ones to get?	Clorox9	MKIII Supra	0	06-14-2009 04:35 PM
What type of Rings for NOS?	abhattan	MKIII Supra	1	03-20-2008 11:27 PM
Bhg vs worn rings vs valve guides	Kuban	MKIII Supra	22	04-23-2007 02:18 AM
1jz & 2jz Piston Rings	joolhamdi	MKIII Supra	4	04-14-2006 02:44 AM