Crankshaft pulley
 

:frown: My crankshaft pully broke off 2day going to work. What can i do fix it?

Was it the pulley the broke or the bolt came out

is a gouge in 1 side shaft or so it feels like one. duno here pichttp://www.toyota-supra.info/forums/...icture1528.jpg

That's trash in my opinion. No way I'd even consider trying to get the amount of material that's missing welded in, cut back to shape, extract the threads inside and grind out a new woodruff key way..... I just wouldn't trust it. Besides, it's going to be cheaper to buy a used crank, get it polished and put in new bearings on the bottom end.

I'm not sure why, but Ghostpopi's posts with pictures of the damage were flagged and in the moderation queue where no one else would see them. I've approved the posts so now everyone should see two posts each with one picture preceding my posts.

so anyone wanna buy a parts car? :(

Hit me up if you wanna sell some interior parts. :D

You should be able to get a crankshaft relatively cheap but shipping one won\'t be cheap and it needs to be packed by someone who knows what they\'re doing or you\'ll end up with a warped paperweight. This isn\'t the easiest thing to fix but it could be much, much worse.

I still feel threads inside. but the gough is bad...

http://www.toyota-supra.info/forums/...icture1530.jpg