Aftermarket Tail lights?? - Page 2

gorillaguy8 · 08-09-2006, 06:06 PM

I just bought a 2nd supra from KY and it has Nissan R34 Skyline tail lights on it. All the remolding was done with bondo, so it doesnt look all that good. But i plan of making a metal conversion peice to make the lines of the rear end look a lot better.

newbsupra · 08-10-2006, 01:21 AM

can u get some pics?

Supra2NR · 08-10-2006, 02:10 AM

Quote:

Euro taillights are for ricers

lambo's got euro lights, are they considered ricers?

but my taillight has a crack on it, i have no choice but to bondo and paint over it, hoperfully it will look good

newbsupra · 08-10-2006, 05:55 AM

yea.. i really dont see how there considered "ricer".. like we do see them alot on ricers.. but i think they look pretty sweet actually. kind of like the concept of the clear corners? right?

Bill UK · 08-10-2006, 08:42 AM

I thought Europe and US rear lights where the same, the only ones that where different where the Jap imports. The first photo is what I believe to be a Jap import, the second is an Europe modified rear light.

Bill UK · 08-10-2006, 02:20 PM

Quote:

Originally Posted by kwnate

Euro taillights are for ricers... Youre not a ricer are you? Upgrade to the better looking 89+ tail lights.

PS: What`s a ricer ?

Supra2NR · 08-10-2006, 08:01 PM

Quote:

PS: What`s a ricer ?

here we go again

ur from uk right? i would assume you guys have these cars there too
there's a thread by the way in the off topic forum area

but here's a few clue on how to spot a ricer
if a cars weighs more than it came from the factory bcuz of extrior mods
its a ricer

if a car has a four inch exhaust, and it naturally aspirated
its a ricer

if a car has a boieng 747 wing on the back, while being fwd
its a ricer

if the owner spent 10,000 dollars on a car and it does 16's on a 1/4 mile
its a ricer

if the owner paid more for rims than the value of his car
its a ricer (or in this case its ghetto)

if a car has more than two batteries, jus to make his car shine like the sun
its a ricer

need i go more?

Bill UK · 08-10-2006, 09:32 PM

Well thanks for that, completely bog standard apart from waist gate shimmed,
de cat and small mod to instrument panel .Supranatural you could call it.
Just stripped the engine out for re bore (big end seized), any recommended suppliers for pistons, rods and shells in the US. The UK prices are twice that of US.
http://www.toyota-supra.info/forums/showthread.php?t=5560

Many thanks for welcome !

Bill UK · 08-10-2006, 10:40 PM

My mates 1992 2.5 TT Aero, I think this must be a ricer ?

Supra2NR · 08-11-2006, 03:11 AM

depends what he has under the engine

08-09-2006, 06:06 PM	#11
gorillaguy8 3" Exhaust Join Date: Apr 2006 Location: St. Louis Posts: 55	Skyline Lights I just bought a 2nd supra from KY and it has Nissan R34 Skyline tail lights on it. All the remolding was done with bondo, so it doesnt look all that good. But i plan of making a metal conversion peice to make the lines of the rear end look a lot better.

08-10-2006, 01:21 AM	#12
newbsupra 3" Exhaust Join Date: May 2006 Location: Sask/Canada Posts: 238	can u get some pics? __________________

08-10-2006, 05:55 AM	#14
newbsupra 3" Exhaust Join Date: May 2006 Location: Sask/Canada Posts: 238	yea.. i really dont see how there considered "ricer".. like we do see them alot on ricers.. but i think they look pretty sweet actually. kind of like the concept of the clear corners? right? __________________

08-10-2006, 08:42 AM	#15
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	I thought Europe and US rear lights where the same, the only ones that where different where the Jap imports. The first photo is what I believe to be a Jap import, the second is an Europe modified rear light. Attached Thumbnails Last edited by Bill UK; 08-10-2006 at 01:05 PM.

08-10-2006, 09:32 PM	#18
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Well thanks for that, completely bog standard apart from waist gate shimmed, de cat and small mod to instrument panel .Supranatural you could call it. Just stripped the engine out for re bore (big end seized), any recommended suppliers for pistons, rods and shells in the US. The UK prices are twice that of US. http://www.toyota-supra.info/forums/showthread.php?t=5560 Many thanks for welcome ! Attached Thumbnails

08-10-2006, 10:40 PM	#19
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	My mates 1992 2.5 TT Aero, I think this must be a ricer ? Attached Thumbnails

08-11-2006, 03:11 AM	#20
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	depends what he has under the engine __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
After market tail lights	coltskicker	MKIII Supra	2	04-19-2008 12:19 AM
Modded Tail lights "JDM look"	theWeezL	MKIII Supra	15	12-16-2007 12:09 AM
tail lights out need help!	supraman121	MKIII Supra	5	12-21-2006 09:16 PM