Timing belts
 

Good brands for timing belts?

Gates?
Dayco?
Beck/Arnley?
Oes Genuine?
PCI?

or Others

Gates is pretty much the equivalent the Toyota's. My preference would be Greddy, Toyota, Gates. Gates may also offer a reinforced performance belt which has a similar construction to the Greddy.

OEM or Gates gets my vote as well.:)

I'm about to replace mine again after twelve years and 70,000 miles. The last belt I replaced had 80,000 miles on it. I've always used Toyota made timing belts from the dealer although I've heard lately that Toyota is going to discontinue making it. I've never had one break on me in my stock turbo application. I'm also replacing the tension pully which has 265,000 miles on it. I got a replacement pully on eBay. The ads said it was an NSK but would arrived was KOYO. It seems heavier than stock. I was also considering getting a phenolic resin pully that didn't have a open groove in the middle like the metal one. GMB is a brand that makes one and it's very low cost but I'm not sure who makes the bearing in it.

you also gona do your water pump while your there?

Did the water pump 2 weeks ago. It lasted 17 years. I noticed some tracks on the plastic splash pan and traced it to the lower weep hole on the pump.