Removal of ENGINE and transmission

GreenChevelleSS · 10-29-2005, 03:19 AM

I'm about to remove the engine from my '90 supra the shop manual tells me to remove the transmission with the engine, but i dont want to, so can i just remove the engine and just leave the tranny in the car???

Thanks,

Dan

Jrok25supra · 10-29-2005, 03:51 AM

Sure. I havent done it myself but i heard its easier that way.

lilsmitty · 10-29-2005, 04:32 AM

Yea i just removed my engine with the tranny in the car. the ony hard thing to do is get the tranny bolts unbolted.

mrnickleye · 10-29-2005, 07:34 AM

Coming out is fairly simple. Going back in is where the 'fun' begins. I've done both methods. I would pull trans/eng together, as you can put it all together, then slip it in.

GreenChevelleSS · 10-31-2005, 01:25 PM

well engine is out..... Im so glad I did pull it, this is one nasty SOB, The rod bearings where really bad worn and the sludge and rust in the engine is horrible. We found another gasket leak and 3 pistons had rings so gummed up that they were stuck and its one PITA to get them out....

Bullz_EyE · 10-31-2005, 02:12 PM

Well, at least your making progress.

10-29-2005, 03:19 AM	#1
GreenChevelleSS 3" Exhaust Join Date: Oct 2005 Location: okiehoma USA Posts: 70	Removal of ENGINE and transmission I'm about to remove the engine from my '90 supra the shop manual tells me to remove the transmission with the engine, but i dont want to, so can i just remove the engine and just leave the tranny in the car??? Thanks, Dan __________________ 1990 Toyota Supra Turbo 7M-GTE 1970 Chevrolet Chevelle SS 396 1996 Chevrolet Silverado Z71 www.cardomain.com/id/3115ultima

10-31-2005, 01:25 PM	#5
GreenChevelleSS 3" Exhaust Join Date: Oct 2005 Location: okiehoma USA Posts: 70	well engine is out..... Im so glad I did pull it, this is one nasty SOB, The rod bearings where really bad worn and the sludge and rust in the engine is horrible. We found another gasket leak and 3 pistons had rings so gummed up that they were stuck and its one PITA to get them out.... __________________ 1990 Toyota Supra Turbo 7M-GTE 1970 Chevrolet Chevelle SS 396 1996 Chevrolet Silverado Z71 www.cardomain.com/id/3115ultima

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine removal	mizuboi	MKIII Supra	11	06-10-2011 06:25 AM
86.5 auto transmission removal HELP!!!	elmer	MKIII Supra	13	04-06-2010 10:41 PM
Should I try to rebuild my transmission, or leave it to experts?	Busted Knuckles	Non-Generation Specific Questions	1	04-15-2008 01:20 AM
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
Keeping Engine Cool	mrnickleye	Supra FAQ	0	06-04-2005 10:02 PM

10-29-2005, 03:51 AM	#2
Jrok25supra 3" Exhaust Join Date: Aug 2005 Location: Morehead City, NC Posts: 73	Sure. I havent done it myself but i heard its easier that way.

10-29-2005, 04:32 AM	#3
lilsmitty Intake Join Date: Jul 2005 Posts: 35	Yea i just removed my engine with the tranny in the car. the ony hard thing to do is get the tranny bolts unbolted.

10-29-2005, 07:34 AM	#4
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	Coming out is fairly simple. Going back in is where the 'fun' begins. I've done both methods. I would pull trans/eng together, as you can put it all together, then slip it in.

10-31-2005, 02:12 PM	#6
Bullz_EyE 3" Exhaust Join Date: Oct 2005 Location: San Diego, CA Posts: 238	Well, at least your making progress.