Fuel injector wires...
 

Can anyone tell my the color of two little wire's going to the first fuel injector for the plug? I just put a new engine in my car and i want to make sure the injector plugs are on the right fuel injectors... Help me out..

???
 

ANYONE Help?

looks like a white or tan wire with a blue stripe and a yellow wire for #1

What year, and engine are you working on? Are you using the stock harness or the one for the new engine? Did you upgrade from a N/A to turbo? Need some more info to answer your ?.

I put a stock engine back in it non turbo. 87 7m-ge

How bout the rest joel!!!! :-)

mines a 89 7mgte, but i will go look and edit this post for ya,

ok looks like they are as follows:

1 and 4 are yellow wire and blue wire w/ tan stripe
2 and 6 are red wire and white wire with black stripe
3 and 5 are solid tan and red wires

but that makes me wonder if mine are in the wrong spots? i would thunk that 2,5 and 3,6 were on the same like 1,4, but it sure runs good as is...

can anyone else confirm or confront these for me now hahhahahhaha
the coil packs run 1-6, 3-4, and 2-5 so im really confused now...

good luck...

whew found it...
 

bammm. looks like mine are correct..if i read this scematic correctly...

http://groundsky.co.nz/techinfo/TSRM/25_D.pdf

good luck lilsmitty

your awsome bro... I just got done puttin my engine in and i tried startin it and it started for 5 sec.s and then shut off..... I had to buy a Vsv valve and a bvsv valve... Sucks ass cuz there like 300 bucks but i found some at a junkyard in cali but i will let you kno if she runs when i get the parts.... Hit me up on AIM sometime lilsmittyholla.... Peace