Brake lights not working!

[j3pz]

ya i read something like that somewhere. the box or sensor or whatever sometimes screws up and wont let the lights work. you can bypass this but then the light on the dash stays lit. think i read it on sogi

[lifesnotfair]

I ordered that damned yellow sensor today, 10 bux plus 5 for shipping. Hope it makes my lights work and shut off the bloody cluster light.

[suprra_girl]

when you upgrade to 89+ lights you need to get teh light box that comes on 89's as well as they have a different resistance or something

hope ya ordered the right one

[lifesnotfair]

Now you scared me! I just hope it works once I get it...

[lifesnotfair]

I was kinda drunk when I replied to that yesterday. Anyways, now that I read it again, I'm angry. If it doesn't work I'll be unhappy I cannot stand that light in the dashboard being on all the time, argh! To me, that's even worse than having the break lights not working, hah. Although that is dangerous, I need them to work properly, as the ones in the wing is small....

[ekoston69]

Hi my lights just did the exact same thing a few days ago and i think its the box because everything else (switch, wires, fuses etc) seem fine. Did you get yours working in the end? Also my soopies taillights have been converted to the 91 tail lights (3 piece) and i have a black lamp failure box in the back..

[ekoston69]

ok now they work again how odd. Id still say its the dodgy box..

[ice2x01]

Originally Posted by j3pz

ya i read something like that somewhere. the box or sensor or whatever sometimes screws up and wont let the lights work. you can bypass this but then the light on the dash stays lit. think i read it on sogi

sorry to bring a thread back from the dead, but I just got a supra and am having the same exact problem, does anyone have details on this bypass?


Thanks

[Subjug4tor]

now im really raising the dead with this thread, but im also curious about the bypass mentioned here...

[spudz29212MKIII]

Well, I had same problem with the taillights (rear hatch leak). I had water get into Tailight Failure Sensor and also corroded my taililights. I also took off my wing and plugged the wholes but, I replaced the third light with the bulb and threw some tape on it so the warning light would shut up. Anywho

I bought a used Tail Failure Sensor on ebay (**be sure you match the part numbers from your original one**) threw that on, yet still tail lights where not operating correctly. (i also checked all my relays and switches, which is a good idea).

What I finally did that fixed it was: I ripped all the tail lights out, got new pigtails, new bulbs, and some di-electric grease. I completely dissasembled it all cleaned and re-wired with new everything, minus the bulb holders (idk the proper name for them) i just cleaned them.

Threw some di-electric grease on the bulbs and new pigtails, installed and I was good to go everything works fine..If your new to wiring you might need some help..but thier is some helpful directions from supramania : How-To:Repair tail lights - SupraMania

Dont know what path you will take but this is what worked for me