|
![]() |
#1 |
3" Exhaust
Join Date: Oct 2005
Posts: 169
![]() |
![]()
My break lights are not working. I doubt it's the bulbs, as yesterday I swapped the 89+ JDM lights and I'm having the same problem (they came with bulbs).
When I hit the break pedal, the ONLY light than turns on is the one in the spoiler.. but the tail lights do not get a "higher intensity" as they should. I mean, if it's night and I turn the lights on, the rear lights do turn on, but when one breaks, they should light up more.. And when it's daylight and I don't have them on, they should also light up when I break, but they don't. Only the spoiler one. The dashboard doas indicate there is something wrong (you know, that light next to the "open doors" light). Well, it's not the bulbs I believe, and it's not the pedal contact (because spoiler one works), so, what could it be? Could it be the yellow box in the back? I heard that when that breaks, the break lights stay ON all the time.. is this true? I think I'll take out the box and give it to this electronic tecnician who works for us here at the company so he checks it out, coz it might be hard to find (?). Any1 has ideas? |
![]() |
![]() |
![]() |
#2 |
500whp yet?
Join Date: Nov 2005
Location: Mechanicsville, MD, US of A, 20659
Posts: 1,060
![]() |
![]()
ya i read something like that somewhere. the box or sensor or whatever sometimes screws up and wont let the lights work. you can bypass this but then the light on the dash stays lit. think i read it on sogi
__________________
88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat |
![]() |
![]() |
![]() |
#3 |
3" Exhaust
Join Date: Oct 2005
Posts: 169
![]() |
![]()
I ordered that damned yellow sensor today, 10 bux plus 5 for shipping. Hope it makes my lights work and shut off the bloody cluster light.
![]() |
![]() |
![]() |
![]() |
#4 |
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
![]() ![]() |
![]()
when you upgrade to 89+ lights you need to get teh light box that comes on 89's as well as they have a different resistance or something
hope ya ordered the right one
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me ![]() Pics of my build. "Good girls are just bad girls that don't get caught" ![]() Do a diagnostic first! |
![]() |
![]() |
![]() |
#5 |
3" Exhaust
Join Date: Oct 2005
Posts: 169
![]() |
![]()
Now you scared me! I just hope it works once I get it...
![]() |
![]() |
![]() |
![]() |
#6 |
3" Exhaust
Join Date: Oct 2005
Posts: 169
![]() |
![]()
I was kinda drunk when I replied to that yesterday. Anyways, now that I read it again, I'm angry. If it doesn't work I'll be unhappy
![]() |
![]() |
![]() |
![]() |
#7 | |
Stock
Join Date: May 2006
Location: Florida
Posts: 1
![]() |
![]() Quote:
Thanks |
|
![]() |
![]() |
![]() |
#8 |
Stock
Join Date: Apr 2008
Location: DFW Texas
Posts: 16
![]() |
![]()
now im really raising the dead with this thread, but im also curious about the bypass mentioned here...
|
![]() |
![]() |
![]() |
#9 |
3" Exhaust
Join Date: Mar 2008
Location: Columbia, SC
Posts: 69
![]() |
![]()
Well, I had same problem with the taillights (rear hatch leak). I had water get into Tailight Failure Sensor and also corroded my taililights. I also took off my wing and plugged the wholes but, I replaced the third light with the bulb and threw some tape on it so the warning light would shut up. Anywho
I bought a used Tail Failure Sensor on ebay (**be sure you match the part numbers from your original one**) threw that on, yet still tail lights where not operating correctly. (i also checked all my relays and switches, which is a good idea). What I finally did that fixed it was: I ripped all the tail lights out, got new pigtails, new bulbs, and some di-electric grease. I completely dissasembled it all cleaned and re-wired with new everything, minus the bulb holders (idk the proper name for them) i just cleaned them. Threw some di-electric grease on the bulbs and new pigtails, installed and I was good to go everything works fine..If your new to wiring you might need some help..but thier is some helpful directions from supramania : How-To:Repair tail lights - SupraMania Dont know what path you will take but this is what worked for me
__________________
Zach |
![]() |
![]() |
![]() |
#10 |
Stock
Join Date: Apr 2008
Location: JERSEY
Posts: 2
![]() |
![]()
i have an 87' supra.....and i had the same problem, first i checked the bulbs, bulbs were good, then i checked the fuse, the fuse was good, then i checked the "yellow box" you were talking about, i opened it up and found a burnt circuit( the box is under the driver's tailight ), so i replaced it and the brakes work perfect now........i got it on ebay LAMP FAILURE TOYOTA model no. 89373-32120, its cheap and easy to fix, because the toyota dealer was charging me 280 over here in jersey..........hope it helped you
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
My brake lights are stuck on. wtf! | Isphius | MKIII Supra | 16 | 09-07-2009 08:48 PM |
Brake Lights | zebrahabitz | MKIII Supra | 2 | 08-13-2009 06:29 AM |
Dash lights and Side marker lights are not working | ebang | MKIII Supra | 0 | 04-01-2008 12:35 PM |
87 supra brake lights | ministrytrav | MKIII Supra | 4 | 11-23-2005 08:53 PM |
brake lights problem | MWoz34 | MKIII Supra | 2 | 09-14-2005 03:08 AM |