Inlet Air Temp

01-25-2005, 12:24 PM

Ok so im looking for the part that checks the air temp in the inlet is it attached to the airflow meter or does the mk3 not have one, i noted the unit that attaches to the air flow has 5 wires so is the air temp 2 of these??, i could go into why i need this info, but hey too long.............. any electric diagrams out there i can get free or do i have to get one of those manuals i keep seeing on ebay, any help on this matter would be well helpful......... cheers

p.s. i have a 1991 mk3 in red only mods ive done are hks induction kit, hks dump valve, and bidding on ebay for a strut brace, heading also for hks downpipe, n exhaust.........

the_fallen · 01-25-2005, 09:09 PM

would be easier if you said the motor that you were running. theres 5 basic different engine setups for the mk3, and all of them have a different intake setup.

assuming your talking about the 7m-gte, then yes, the air temp sensor is part of the afm. in saying that, it's not just housed in there, it's an integral part of it, so i don't think that you can simply splice some wires to tap into the temp feed. just do what i did, go to your local electronics store, and get a indoor/outdoor temp sensor, and run the outdoor temp sensor to just in front of the filter. works perfectly.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water temp gauge dead	Fredde	MKIII Supra	4	05-27-2008 12:40 AM
strange temp gauge activity	D_Train	MKIII Supra	21	08-25-2007 05:43 PM
Coolant temp sensor thread size??	petey turbo	MKIII Supra	5	02-12-2007 06:15 PM
Temp. Sender-what does it do?	Benesesso	MKIII Supra	2	05-10-2006 03:06 AM
quick question re: turbo inlet	born2drv	MKIII Supra	2	01-11-2006 05:02 PM

01-25-2005, 12:24 PM	#1
Rob Hall Guest Posts: n/a	Ok so im looking for the part that checks the air temp in the inlet is it attached to the airflow meter or does the mk3 not have one, i noted the unit that attaches to the air flow has 5 wires so is the air temp 2 of these??, i could go into why i need this info, but hey too long.............. any electric diagrams out there i can get free or do i have to get one of those manuals i keep seeing on ebay, any help on this matter would be well helpful......... cheers p.s. i have a 1991 mk3 in red only mods ive done are hks induction kit, hks dump valve, and bidding on ebay for a strut brace, heading also for hks downpipe, n exhaust.........

01-25-2005, 09:09 PM	#2
the_fallen 3" Exhaust Join Date: Nov 2004 Posts: 81	would be easier if you said the motor that you were running. theres 5 basic different engine setups for the mk3, and all of them have a different intake setup. assuming your talking about the 7m-gte, then yes, the air temp sensor is part of the afm. in saying that, it's not just housed in there, it's an integral part of it, so i don't think that you can simply splice some wires to tap into the temp feed. just do what i did, go to your local electronics store, and get a indoor/outdoor temp sensor, and run the outdoor temp sensor to just in front of the filter. works perfectly.