need help replacing 89 supra front and rear brake pads

[89supra323]

can someone please give me info on how 2 replace my brake pads.it probably sounds stupid but im only 18 and i want 2 learn how to do all the maintnance on my car myself. thank you.

[TONY!]

Well, that is explained in the TSRM:
http://www.cygnusx1.net/supra/librar.../br/BR_01.html


Off the top of my head...

First crack the lugs loose
Jack the car
Take the wheel off
For the front--remove the brake hose from where it is mounted (I think it is a 10mm?)
Unbolt the the lower part of the caliper from the bracket
Lift the caliper up and then slide if off
Remove brake pads
Apply Brake Quiet to the backside of the pads, NOT the friction side (this keeps them from squeeling)
Insert pads

The rest is the reverse of taking them off.

At least that is one version from memory...

[mrnickleye]

Also, before putting the caliper back down on the new pads, you will have to use some very big channel lock pliers (or a big 'c' clamp) to squeeze the caliper piston all the way in.

IMPORTANT....
You should crack open the air bleed screw to do this, to let the fluid release out so the piston will go in. The reason for this is to NOT force the fluid back up the line, which may send debri into the antilock brake solenoids, and/or master cylinder.

NOTE....
Also, do not ever let the caliper hang by the flex line. It can crack the inside of it, and cause a NO brakes situation (and/or leak).

If you ever have the caliper all the way unbolted, use a coat hanger to wire it up on the chassis so you don't damage the line.

Note...me, I've only done 500+ brake jobs.

Also....for nice hands, better hours, more $$, ...become a doctor or lawyer (like Waylon Jennings said, "mommas, don't let your babies grow up to be cowboys, let 'em be Drs. and lawyers and such".)
Its too late for me, I'm a cowboy !

[suprra_girl]

ohhhhhhhh so you mean when i took my hubs apart etc and just let me calipers hang around that's a bad thing? LOL
well they don't leak yet
guess it's an excuse to get the pretty braided lines then

i never gave it a thought about backing in the cylinder with the bleed nipple cracked, my poor abs lol

heh we all learn something everyday

[mrnickleye]

I have ABS. It works too, cause its come on a few times when I had to stop quick on a bit of a slippery surface.

I pray I never have a problem with it. Diagnosing the fault, and then pinpointing the exact part needed can be very time consuming, and just plain PITA. And possibly very expensive.

I like everything to work as it was designed, but in case I have an ABS problem, and it costs alot to fix, I'll probably unplug it.

The brakes will work like a car that didn't come with ABS, so safety is still good.

[tyron]

How much exactly is a full brake job? and are parts easy to come by?

thnx

[mattfurlani]

I bought loaded calipers instead of trying to redo all the cylinders. I found something funny. You can accdentally (by not readint the big 'r' and 'l' on the caliper) put them on upside down in the front.
Needless tosay it took me many days to figure itout.

I'll never under estimate my own stupidity again.

[mrnickleye]

Originally Posted by mattfurlani

I bought loaded calipers instead of trying to redo all the cylinders. I found something funny. You can accdentally (by not readint the big 'r' and 'l' on the caliper) put them on upside down in the front.
Needless tosay it took me many days to figure itout.

I'll never under estimate my own stupidity again.

This was not known, and made me laugh out loud !

[mattfurlani]

this was a non abs type too.. perhaps that was partially the problem

[dannydavi]

well if your just replacing the break 'pads' then you can get them all at your local parts store for under 100 bucks. then it's as simple as they said, you take off the wheel, loosen the lower caliper bolt, twist up, remove old pads, depress caliper with c clamp or channel locks, might want to release the bleeder screw, put new pads in, place over rotor, tighten caliper bolt, then test them bad boys.