Heater. - Page 2

ddmcse · 04-26-2006, 05:26 PM

http://www.ddmcse.com/turbo/heatervs.htm

Kai · 04-26-2006, 05:51 PM

Quote:

Originally Posted by Reeves

The "low" speed on mine doesn't seem to do anything, what can I do to fix it?

See my post - #8

Kai · 04-26-2006, 05:52 PM

Quote:

Originally Posted by ddmcse

http://www.ddmcse.com/turbo/heatervs.htm

Site displays in firefox only as raw HTML - must have something to do with that doctype thingy

ddmcse · 04-26-2006, 06:53 PM

i had difficulty creating it too . i used nvu which should do a fine job .
i'm using firefox 1.0.6

could you try adding the L at the end ?

http://www.ddmcse.com/turbo/heatervs.html

let me know , i'm at work and will have to fix it at home later

it is a common issue though and a google for toyota supra heater vsv should get results

edited : i took off the doc type on the top of the page might work better now

Burn N' Up · 04-27-2006, 05:23 PM

The low speed is the resistor pack someone mentioned earlier, check the valve that DDMCSE talked, the VSV on it is known to go out, constantly! You can check to see if this is the problem by manually opening it with the heater in the car set to hi and with the highest temp. Open the valve manually, if heat comes out, you found your problem.

SCRAMJET · 04-30-2006, 01:43 AM

I've found the the valve on the firewall. I took it apart and freed up the tap. Not totally free but heater works a bit now. I've had my car 7 years and the heater only has worked for two days of that(about two years ago it just started working for a couple of days). So it works some now. Good enough for me. I'm in Australia so the heater aint that essential anyway..

Burn N' Up · 04-30-2006, 05:12 AM

If it hasn't been working take th hosese off both ends of your heater core, hook a hose up and blow in it with your lungs, it'll clear the rusted junk out of the core. Thats what happens when the heater just sits like that.

Kai · 05-07-2006, 08:22 AM

*sigh* I replaced the heater resistor pack the other day, and the fan *still* doesnt work. Checked the fuses, all was well, nothing blown, and if the switch is set to 'off' then no aircon or heating comes on at all. If set to any of the other positions, then i get heat/cold air, but only if the car is doing 40/50+ mph

Could this be a relay fault, or has the actual blower motor borked on me?

Kai · 05-08-2006, 10:56 PM

No-one have any ideas?

flight doc89 · 05-08-2006, 11:32 PM

Quote:

Originally Posted by Reeves

The "low" speed on mine doesn't seem to do anything, what can I do to fix it?

mine neither, but it still blows (barely) when turned off. Also, my air never changes temp (towards hot OR towards cold)

04-26-2006, 05:26 PM	#11
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	http://www.ddmcse.com/turbo/heatervs.htm __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

04-26-2006, 06:53 PM	#14
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	i had difficulty creating it too . i used nvu which should do a fine job . i'm using firefox 1.0.6 could you try adding the L at the end ? http://www.ddmcse.com/turbo/heatervs.html let me know , i'm at work and will have to fix it at home later it is a common issue though and a google for toyota supra heater vsv should get results edited : i took off the doc type on the top of the page might work better now __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS Last edited by ddmcse; 04-26-2006 at 06:57 PM.

05-07-2006, 08:22 AM	#18
Kai 3" Exhaust Join Date: Mar 2006 Location: London Posts: 69	sigh I replaced the heater resistor pack the other day, and the fan still doesnt work. Checked the fuses, all was well, nothing blown, and if the switch is set to 'off' then no aircon or heating comes on at all. If set to any of the other positions, then i get heat/cold air, but only if the car is doing 40/50+ mph Could this be a relay fault, or has the actual blower motor borked on me? __________________

05-08-2006, 10:56 PM	#19
Kai 3" Exhaust Join Date: Mar 2006 Location: London Posts: 69	No-one have any ideas? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heater hose locations	suprabahamut	MKIII Supra	4	12-16-2008 10:07 PM
location of heater core	MKIIIBeast	MKIII Supra	1	02-25-2008 02:00 PM
heater problem..... cold like heck...	hangsupra	MKIII Supra	9	01-28-2007 05:35 PM
Heater By-Passing...Your Thoughts	mrnickleye	Non-Generation Specific Questions	2	05-03-2006 03:06 PM
heater answers??	1988gte	MKIII Supra	14	12-05-2005 07:07 PM

04-27-2006, 05:23 PM	#15
Burn N' Up 3" Exhaust Join Date: Sep 2005 Posts: 238	The low speed is the resistor pack someone mentioned earlier, check the valve that DDMCSE talked, the VSV on it is known to go out, constantly! You can check to see if this is the problem by manually opening it with the heater in the car set to hi and with the highest temp. Open the valve manually, if heat comes out, you found your problem.

04-30-2006, 01:43 AM	#16
SCRAMJET 3" Exhaust Join Date: Jul 2005 Location: perth west aussie Posts: 75	I've found the the valve on the firewall. I took it apart and freed up the tap. Not totally free but heater works a bit now. I've had my car 7 years and the heater only has worked for two days of that(about two years ago it just started working for a couple of days). So it works some now. Good enough for me. I'm in Australia so the heater aint that essential anyway..

04-30-2006, 05:12 AM	#17
Burn N' Up 3" Exhaust Join Date: Sep 2005 Posts: 238	If it hasn't been working take th hosese off both ends of your heater core, hook a hose up and blow in it with your lungs, it'll clear the rusted junk out of the core. Thats what happens when the heater just sits like that.