Info plz

frostburn · 07-09-2006, 09:04 AM

ok... what has to be done to the 89 supra turbo before being able to run a new turbo and whats a good turbo to run... money isnt an option i need to know

southernsupra1 · 07-10-2006, 03:43 AM

If your stock turbo is running fine, there is no need to change it. You can easily get 12psi of boost from it. I used a greddy profec B spec II boost controller, but some of the guys on here have shimmed the wastegate and got the same result. I have a 91 turbo and am running mid 8's in the 1/8 with no other mods and on street radials.

southernsupra

IHateHacks · 07-10-2006, 02:12 PM

I'd run a metal HKS thicker head gasket, ARP head studs, 255 fp, 550cc injectors, SAFC-II, and the greddy 20G turbo kit if money was not an option. Very capable of over 400 wheel horse anything more and Id run ARP rod bolts.

frostburn · 07-10-2006, 02:55 PM

nice thanks guys

07-09-2006, 09:04 AM	#1
frostburn 3" Exhaust Join Date: Jun 2006 Location: ontario CA Posts: 128	Info plz ok... what has to be done to the 89 supra turbo before being able to run a new turbo and whats a good turbo to run... money isnt an option i need to know

07-10-2006, 03:43 AM	#2
southernsupra1 Stock Join Date: Jul 2006 Location: savannah Posts: 14	stock is ok If your stock turbo is running fine, there is no need to change it. You can easily get 12psi of boost from it. I used a greddy profec B spec II boost controller, but some of the guys on here have shimmed the wastegate and got the same result. I have a 91 turbo and am running mid 8's in the 1/8 with no other mods and on street radials. southernsupra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tranny ? Need Info!	SilverBullet05	Non-Generation Specific Questions	0	07-07-2008 09:45 PM
info on 1984 supra	84cuddy	MKII Supra	1	11-22-2007 11:00 AM
Info on MkIII Supra	Nic	MKIII Supra	2	03-15-2007 11:27 PM
Emissions Test Info in "Your" Area/State	mrnickleye	Off Topic Forum	9	05-01-2006 01:11 AM
89 NA => Turbo SWAP INFO	akadiablo	MKIII Supra	0	12-09-2005 06:21 AM

07-10-2006, 02:12 PM	#3
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	I'd run a metal HKS thicker head gasket, ARP head studs, 255 fp, 550cc injectors, SAFC-II, and the greddy 20G turbo kit if money was not an option. Very capable of over 400 wheel horse anything more and Id run ARP rod bolts.

07-10-2006, 02:55 PM	#4
frostburn 3" Exhaust Join Date: Jun 2006 Location: ontario CA Posts: 128	nice thanks guys