Suspension - TEMS - Coilovers

Spudboy · 08-11-2006, 09:06 PM

Does anybody have experience discontinuing the use of the TEMS? If so, any hints? Did you just disconect at the shocks, secure and leave all wiring in place?

I will be putting on new TEIN Flex coilovers with EDFC (Electronic Damping Force Controller) and wont be using the TEMS system but I would just assume disconect it BUT leave it in place in case I ever want to go back all stock.

Any advice?

Supra2NR · 08-12-2006, 06:04 AM

maybe you can look at this at another light

you can use the old wires as a guide for the new ones and jus wrap the old wires with them ,
that way it'll be cleaner
and u can use the old spot where the tems control used to go and put the edfc controller there

kwnate · 08-12-2006, 04:05 PM

Quote:

Originally Posted by Supra2NR

and u can use the old spot where the tems control used to go and put the edfc controller there

??

Follow the instructions for installing the edfc and the 4 motors.

As for the stock tems, Just disconnect the tems connectors on the tops of the shocks, hide them. Run your new lines for the edfc as pretty as possible and your done. You don't need to disable anything. You can remove the tems controller but I just left mine in. You'll still have the tems lights on the dash, but who cares?

Spudboy · 08-14-2006, 02:33 PM

Thanks. That's what I was planning on but I didn't know if the TEMS computer was going to be confused. I think I'll just disconnect that too.

Sounds like you have TEIN Flex. Any tips, comments, or advice on them?

08-11-2006, 09:06 PM	#1
Spudboy 3" Exhaust Join Date: May 2006 Location: So. Cal Mountains Posts: 178	Suspension - TEMS - Coilovers Does anybody have experience discontinuing the use of the TEMS? If so, any hints? Did you just disconect at the shocks, secure and leave all wiring in place? I will be putting on new TEIN Flex coilovers with EDFC (Electronic Damping Force Controller) and wont be using the TEMS system but I would just assume disconect it BUT leave it in place in case I ever want to go back all stock. Any advice?

08-12-2006, 06:04 AM	#2
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	maybe you can look at this at another light you can use the old wires as a guide for the new ones and jus wrap the old wires with them , that way it'll be cleaner and u can use the old spot where the tems control used to go and put the edfc controller there __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-14-2006, 02:33 PM	#4
Spudboy 3" Exhaust Join Date: May 2006 Location: So. Cal Mountains Posts: 178	Thanks. That's what I was planning on but I didn't know if the TEMS computer was going to be confused. I think I'll just disconnect that too. Sounds like you have TEIN Flex. Any tips, comments, or advice on them? Last edited by Spudboy; 08-14-2006 at 02:41 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TEMS Problem!	88 MARK3	Non-Generation Specific Questions	13	11-08-2018 10:41 PM
Interested in V3 Coilovers for MKIII?	Twilight	MKIII Supra	12	09-23-2008 10:07 PM
have some questions about 86-92 supra suspension	jeremy_e87	Non-Generation Specific Questions	2	01-10-2007 11:53 PM
whats your opinion on the TEMS	mad_dicer	MKIII Supra	2	10-05-2006 02:17 PM
Strut bars for a 1990 N/A Supra with TEMS	Paul Bernett	Non-Generation Specific Questions	8	11-29-2004 02:07 AM