head machine

ddmcse · 08-24-2006, 01:40 PM

see the lines left by the milling machine ?

i removed those lines by hand, using a lapping tool

Bill UK · 08-24-2006, 02:44 PM

Quote:

Originally Posted by ddmcse

see the lines left by the milling machine ?
i removed those lines by hand, using a lapping tool

How much did you skim off your head ? looking at your photo there seems to have been a lot of material removed. This is the photo of my head straight from the block.

jfunez · 08-24-2006, 09:00 PM

cant remember but it was a bit, that's why the machinist recomended me to get a 1.4 or a 1.5 mm head gasket also I ot in touch with a company that sell the cometic headgasket and told them how much it had been taken off of the head and he figured the same. It could of posibly been 20 thousands or something like that..

08-24-2006, 01:40 PM	#1
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	see the lines left by the milling machine ? i removed those lines by hand, using a lapping tool __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Head Gasket replacement questions.	DavidLeClair584	MKIII Supra	1	06-09-2007 09:17 PM
N20 and HeAd WoRk	Supra_87_mk3	Non-Generation Specific Questions	4	05-25-2007 03:09 PM
Head and turbo...	Reeves	MKIII Supra	8	05-18-2006 02:40 AM
Fel-Pro Head Gasket for Stock 1990 Turbo Engine	Benesesso	MKIII Supra	5	03-10-2006 10:52 PM

08-24-2006, 09:00 PM	#3
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	cant remember but it was a bit, that's why the machinist recomended me to get a 1.4 or a 1.5 mm head gasket also I ot in touch with a company that sell the cometic headgasket and told them how much it had been taken off of the head and he figured the same. It could of posibly been 20 thousands or something like that..