What is the cheapest, fastest way to gain BIG HP?

[idoke]

I want to know what kind of upgrades can I do without changing the turbo to get maximum output of my 7MGTE? As of this moment, I have a K & N Air Filter, HKS Blow off valve, Megan Downpipe and Trust exhaust. Turbo is currently set at 8PSi. What else could I do to make it run more powerful and yet safe? Thanks!


PS. Thanks to those who contributed to my other help thread. It was the TPS and the screws were loose. Thankyou!

[suprra_girl]

the next best thing you could do would be to upgrade your intercooler and get some intercooler hardpipes
it will make a big difference

[kwnate]

Get a metal headgasket, it'll give you 50hp. Oh wait, I mean it'll give you piece of mind. IMO there is no such thing as safe hp with the stock headgasket from the factory.

[tone loc]

word metal headgasket and arp head screws best thing to start with when trying to gain hp

[idoke]

Oops, forgot that I already have the 1.2mm HKS metal headgasket along with ARP studs. What kind of intercooler should I get? I saw some cheap ones on ebay. They were selling for about $90 dollars or so. What should I do?

[Isphius]

unplug your wastegate actuator

No dont really do that, It will fry your turbo. Unless you have a car that is in terrible shape like me and it boost to 8 psi with the WG unplugged.

[mkthreetillinfinity]

increase the boost up to like 10-12 psi. you should not exceed 14 psi its unsafe to go over 14. if you dont have a boost conroller, put holes on the wastegate hose. 1 hole is equal to 1 psi.

[suprra_girl]

at least buy a boost controller

1 hole is equal to 1 psi

i wouldn't recommend this... that statement is open to interpretation
i.e how big are the holes

and if you do overboost not forgetting toyotas little toy called fuel cut

[Isphius]

Yes, Mine is the same way. My n/a ran beautiful, Every time. Go outside in the winter and it starts up just like a brand new car. But my turbo runs like crap and now has a blown head gasket. lol. It wont start for crap. And once it does, It takes like 20 mins to warm up before it stops misfiring, And then when driving it seems to run fine, Like there is nothing wrong. But once it gets below like 1000 or 1100 rpms it runs like crap again and i have to nurse the rpms back up. Luckily its an auto, which makes it way harder.

[theWeezL]

yeah putting holes in your wastegate actuator line is inexact at best and dangerous at least. Shimming the gate is a proven and reliable way to increase boost. Short of getting a boost controller its the only thing I would even consider.

Isphius, my turbo runs great most of the time. Its just that when it gets hot sometimes it wont restart until she is completely dead cold again (like the next morning). I cant make sense of it, and have changed out nearly every part that could be suspect. She just seems to have a mind of her own. I just dont trust shutting her off somewhere where she might leave me stranded.