help

brs86supra · 10-26-2006, 01:24 AM

i just replaced the head gasket and starter on my 87 turbo adn now none of the lights or guages work adn it wont start, nor will the door buzzer come on after opening the door. i checked my grounds and there all connected. so where could my problem be and where should i start first

nelly26 · 10-26-2006, 02:01 AM

check all fuses and wiring in engine bay

brs86supra · 10-26-2006, 03:39 AM

i changed all the fuses and all the wiring, what had happened was all the guages were working fine and then i pushed the clutch down (but it needs to be bled) adn turned the key and all the guages and lights went out. i was thinking htat it could maybe be my clutch start switch or clutch switch could be stuck adn not working properly

brs86supra · 10-27-2006, 02:46 AM

does anyone have any idea what my problem could be

volto · 10-27-2006, 02:52 AM

I would use a test light and see where your power stops, check the relays first.

Boostesi · 10-27-2006, 04:15 AM

take a look at the starter solenoid.. and make sure the IGN wire is on it and the poitive wire is tight both at the battery and at the starter.

10-26-2006, 01:24 AM	#1
brs86supra 3" Exhaust Join Date: Feb 2006 Location: suffolk, virginia Posts: 65	help i just replaced the head gasket and starter on my 87 turbo adn now none of the lights or guages work adn it wont start, nor will the door buzzer come on after opening the door. i checked my grounds and there all connected. so where could my problem be and where should i start first

10-27-2006, 04:15 AM	#6
Boostesi Stock Join Date: Oct 2006 Location: Rhode Island Posts: 21	take a look at the starter solenoid.. and make sure the IGN wire is on it and the poitive wire is tight both at the battery and at the starter. __________________ pacesetter cat back

10-26-2006, 02:01 AM	#2
nelly26 3" Exhaust Join Date: Oct 2006 Location: UNITED KINGDOM Posts: 58	check all fuses and wiring in engine bay

10-26-2006, 03:39 AM	#3
brs86supra 3" Exhaust Join Date: Feb 2006 Location: suffolk, virginia Posts: 65	i changed all the fuses and all the wiring, what had happened was all the guages were working fine and then i pushed the clutch down (but it needs to be bled) adn turned the key and all the guages and lights went out. i was thinking htat it could maybe be my clutch start switch or clutch switch could be stuck adn not working properly

10-27-2006, 02:46 AM	#4
brs86supra 3" Exhaust Join Date: Feb 2006 Location: suffolk, virginia Posts: 65	does anyone have any idea what my problem could be

10-27-2006, 02:52 AM	#5
volto 3" Exhaust Join Date: Oct 2006 Location: GMT-35 Posts: 52	I would use a test light and see where your power stops, check the relays first.