Issues After Changing Spark Plugs

jfunez · 11-01-2006, 04:35 AM

I think that one bolt or stud at the end of the engine(near no 6 spark plug) is where the heater hose braket bolts down to.. its the coolant hose that comes from the back of the head and into the firewall...there should be a braket there.

Getphazed · 11-01-2006, 05:48 AM

I believe it is the intake manifold im refering to where the leak is. The large, flat silver part on the right side of the engine. The piece that is messed up is bolted on the back end of it towards the bottom, its metal with a metal hose coming off of it.

jfunez · 11-03-2006, 03:44 AM

thats a water outlet...it has a hose that goes to the heater core valve. the bolt is just a banjo bolt, that holds it down, is it leaking?

Getphazed · 11-03-2006, 12:31 PM

I dont know if thats what it is, it is a piece shaped like <> but rounded with a hose coming off, it was shooting out air like crazy, some how i have no idea how but one bolt was mising and the other was barely on, ive never messed with it nor has anone else that im aware of so i dont know how it happend. But the gasket is shot so i need to make a new one and get another bolt for it. Once i tightend it down the car started to perform better. So i think if i fix that issue then all will be good for now. Need to replace the exaust gasket to though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No spark issues	DDBT	MKII Supra	2	01-06-2009 07:08 AM
Spark Plugs (1G-GE vs 7M-GE)	makemedie	Non-Generation Specific Questions	5	10-26-2008 05:19 AM
NGK Spark Plugs	91 Supra	MKIII Supra	5	08-07-2007 03:52 AM
1986.5 with blown Head Gasket - Removing Spark Plugs	unkymurch	Non-Generation Specific Questions	10	03-02-2007 06:48 PM
Spark plugs & WIRES	HEMAN	MKIII Supra	2	11-03-2006 05:31 AM

11-01-2006, 04:35 AM	#1
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	I think that one bolt or stud at the end of the engine(near no 6 spark plug) is where the heater hose braket bolts down to.. its the coolant hose that comes from the back of the head and into the firewall...there should be a braket there.

11-01-2006, 05:48 AM	#2
Getphazed Stock Join Date: Oct 2005 Posts: 16	I believe it is the intake manifold im refering to where the leak is. The large, flat silver part on the right side of the engine. The piece that is messed up is bolted on the back end of it towards the bottom, its metal with a metal hose coming off of it.

11-03-2006, 03:44 AM	#3
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	thats a water outlet...it has a hose that goes to the heater core valve. the bolt is just a banjo bolt, that holds it down, is it leaking?

11-03-2006, 12:31 PM	#4
Getphazed Stock Join Date: Oct 2005 Posts: 16	I dont know if thats what it is, it is a piece shaped like <> but rounded with a hose coming off, it was shooting out air like crazy, some how i have no idea how but one bolt was mising and the other was barely on, ive never messed with it nor has anone else that im aware of so i dont know how it happend. But the gasket is shot so i need to make a new one and get another bolt for it. Once i tightend it down the car started to perform better. So i think if i fix that issue then all will be good for now. Need to replace the exaust gasket to though.