Puting back in ECU/glove compartment?

RNEMESiS42 · 12-14-2006, 05:59 AM

Last year when my dad and I were trying to figure out what was up with my Supra, he took apart the glove compartment and ECU, to test if it was bad or not.
It's all up and running now, but my ECU is just hanging there. I can't seem to figure out exactly how it was mounted without getting in the way! It's really annoying. I've been looking for diagrams and such in the TSRM and on google, but no luck...

89_supra_ · 12-14-2006, 04:13 PM

go to autozone buy a catalog/ bible as i call it, for your car its like 18.99 it tells you everything.

Bill UK · 12-14-2006, 06:06 PM

You can download manuals from these site
MK3 Supra Handbook (3.19MB)
1990 MK3 Supra TSRM Text Edition(51.4MB)
MK3 Supra Engine Fasteners(122KB)

tone loc · 12-14-2006, 08:50 PM

it should run horizontal and you should be able to read what it says on the label (on the ecu) i think there is like three screws that go on some silver brackets.

RNEMESiS42 · 12-15-2006, 12:49 AM

I finally got it, thanks! The manuals didn't really have any good diagrams...but when you mentioned it's horizontal, i found out how it fits in the top left corner. It's screwed in together with the top of the glove compartment, so it's a bit tricky. Especially since you're trying to keep the LED light at the top of the compartment in place, also...
thanks

12-14-2006, 05:59 AM	#1
RNEMESiS42 Intake Join Date: Oct 2005 Location: Mpls, MN Posts: 40	Puting back in ECU/glove compartment? Last year when my dad and I were trying to figure out what was up with my Supra, he took apart the glove compartment and ECU, to test if it was bad or not. It's all up and running now, but my ECU is just hanging there. I can't seem to figure out exactly how it was mounted without getting in the way! It's really annoying. I've been looking for diagrams and such in the TSRM and on google, but no luck... Last edited by RNEMESiS42; 12-14-2006 at 07:16 AM.

12-14-2006, 04:13 PM	#2
89_supra_ Stock Join Date: Nov 2006 Location: Florida Posts: 22	go to autozone buy a catalog/ bible as i call it, for your car its like 18.99 it tells you everything. __________________ http://vids.myspace.com/index.cfm?fu...oid=1273059406

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2.5" drop in front 2" in back?	supraman121	MKIII Supra	11	05-19-2010 05:48 PM
Good 2 B back	scruffboy	Non-Generation Specific Questions	2	02-16-2008 03:08 PM
good to be back	SupraMan1784	Off Topic Forum	1	02-10-2006 10:42 PM
Need help putting engine back together	GreenChevelleSS	MKIII Supra	18	12-17-2005 05:37 PM
Thinking about getting back into a Supra	the_stig	MKIII Supra	5	07-03-2005 08:35 PM

12-14-2006, 06:06 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	You can download manuals from these site MK3 Supra Handbook (3.19MB) 1990 MK3 Supra TSRM Text Edition(51.4MB) MK3 Supra Engine Fasteners(122KB)

12-14-2006, 08:50 PM	#4
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	it should run horizontal and you should be able to read what it says on the label (on the ecu) i think there is like three screws that go on some silver brackets.

12-15-2006, 12:49 AM	#5
RNEMESiS42 Intake Join Date: Oct 2005 Location: Mpls, MN Posts: 40	I finally got it, thanks! The manuals didn't really have any good diagrams...but when you mentioned it's horizontal, i found out how it fits in the top left corner. It's screwed in together with the top of the glove compartment, so it's a bit tricky. Especially since you're trying to keep the LED light at the top of the compartment in place, also... thanks