BOV Hook Up!
 

ok i have a blitz blow off valve with a pipe and i have on the upper intercooler pipe. but my question is what do i do with the old one? do i block off the hose from the manifold or do i just run a long hose to connect that part with the on on the accordian hose. thanks

never mind i got it sounds good i very happy with blitz bov.

you didn't just connect the fitting on the 3000 pipe to the accordian, did you?

no i block off the hose from the manifold and i have the cooleeze accordian replacement and it comes with threaded screws to block off any unwanted ports. so i did that and it is good.

good ot hear man, let me know how it comes out i want to get a blitz one also.

it is good i recommend it sounds good if you want to hear it on my car then click on my myspace link under my posts it is the first 2 videos on the left side of the page. if it doesn't come up that way just type it in. it should work

justin1642 i noticed that you have the cooleze accordian replacement, i just purchased this myself but i dont have the hoses that connect to it i was wondering if you still use the stock ones or if you have something different thanks alot.

no i used the hoses off of the rubber accordian hose they come off and just use those to hook it up but i believe i went and bought some heater hose to lengthen it cuz it didn't hook up just right. so just buy heater hose and use that or just use it to lengthen the stock hoses.

were do u purchase one of these accordian hoses? i have a PIT bov and am not sure how mount it, i was guessing either replacing the stock bov but ive seen them running on the intake pipe before the 3000 pipe with the stock bov still attached...any ideas?