Universal Intercooler piping
 

I was just curious if anyone has bought on of these kits before. If you have, how difficult was it getting it to fit right, did you have to cut anything ect. The only custom hard pipe kit I found for my car was $450 and there is no way in hell I can afford that.

Thanks!

http://store.driftmotion.com/product...uct_id_int=301

Try that maybe?

I think those kits are meant for 1jz engines.

UNIVERSAL!!

They come with 180 degree bends, there is no where I would need a 180 bend on a stock intercooler set-up for a 7mgte.

You can't have a 180 degree bend. 180 degrees is straight(flat).:) ;)

http://store.driftmotion.com/clients...oduct297/0.jpg

"Includes sixteen stainless t-bolt clamps, eight 4 ply silicone couplers, two 45 deg bends, two 90 deg bends, two 180 deg bends, and two straight pipes"

:umno:

My bad, I havent said anything:o

You need to cut them to fit, that's why there are so many couplers. If you can't make that work, well... You should just take it somewhere and have it done, its not rocket science.

hey nate do you nkow if the copy greddy bov works and if all of them work fine..cuz if so i found me a cheap cheap sites..and thank you