how about those speed parts? - Page 2

mr.w · 04-11-2007, 11:12 PM

Well it all depends on the quality of the parts too. You can by cheaper parts and might actually last you a while but usally cheaper the parts the lower the quality. I know going to auto zone and buying parts is always a pain in the ass because since my cars a supra I have to pay double the price for parts on other domestic or import cars. I guess what im saying is it can be costly to run our cars and definatley costly to do reliable performance upgrades. You can buy ebay parts but they will most likely be made cheaply(sometimes you do get a good deal though).

IHateHacks · 04-12-2007, 01:55 AM

How about a coil-on-plug setup for a 7MGTE? How about a real cold air for a GTE that sucks from where the fog light is?

Lets see some pictures, because talk is cheap.

JunkerMK3gte · 04-13-2007, 12:05 AM

thanx mr. w. im glad someone appretiates what im trying to do. your 400 dollar "carbon" hood is actually fiberglass with a layer of c/f on top built by vis. and once again, mine is top of the line stuff. PRFORMANCE UPGRADES not for the common "iwant to look fast" cars. im trying to bring our dying breed of cars back to life AND back with a vengance to kill off whats left of these premade performance cars. of the some like wrx, fairlady's, and rx8.

Quote:

Originally Posted by mr.w

Yeah but our cars are more rarer , older and more of a specialty car than most other imports with cheaper parts.

JunkerMK3gte · 04-13-2007, 12:12 AM

hey mr. hack. whats your deal?. THE QUESTION I HAD ASKED EVERYONE IS... DO YOU WANT TO SEE THESE PARTS ON THE MARKET OR NOT. IF IM ONLY TRYING TO GET A DEMANDING CROWD. HOW IS TALK CHEAP. WOULD IT HURT YOUR FEELINGS THAT MUCH TELLING ME YOU ARE ONE OF A COUPLE HUNDRED PEOPLE THAT WANT THESE PARTS AND NEVER HEAR FROM ME AGAIN? DO YOU HAVE ANY IDEAS OF PARTS OR WOULD YOU LIKE TO SEE THE PARTS IVE TALKED ABOUT OR NOT?!

Quote:

Originally Posted by IHateHacks

How about a coil-on-plug setup for a 7MGTE? How about a real cold air for a GTE that sucks from where the fog light is?

Lets see some pictures, because talk is cheap.

IHateHacks · 04-13-2007, 01:32 AM

So I guess that means no coil-on-plug setup?

Is there any particular reason your site doesn't work??

west_side_supra · 04-13-2007, 04:02 AM

because its a fake duh lol. no jk yea the site doesnt work for me either.

redmaro · 04-13-2007, 03:39 PM

PICS PICS PICS??????

JunkerMK3gte · 04-14-2007, 03:32 AM

sry the sites down... gimme a minute...

Quote:

Originally Posted by west_side_supra

because its a fake duh lol. no jk yea the site doesnt work for me either.

JunkerMK3gte · 04-14-2007, 03:40 AM

k.try it now. and a coil on plug set up would be a waste of money. did you know you can get more out of a CDI. upgrade to a f.a.s.t. system. itll cost you about 1.5k, but when your done youll have an ignition reliable to 12k rpm @ less than .02 ohms interferance, and more than 20k amps. you cant get better than that

JunkerMK3gte · 04-15-2007, 04:04 AM

im sorry dudes. honestly. ive been buildin cars my whole life .its my carreer, my family, and my hope. ive owned my mkiii now for 4 years, wrecked it twice, and rebuilt it both times. (totals) and along the way still found some way to make time to research, take numbers and draw bluprints to the entire car. i want to bring this car back to life. give it a name that it deserves. you know what i mean? ive been trying now to get these ideas together and start manufacturing all that stuff you guys cant find. see i have the resources to do this, and all of you can benifit, right? but all ive gotten in the past few months is crap. i dont understand it. but anyways, do you have ideas?....

04-13-2007, 04:02 AM	#16
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	because its a fake duh lol. no jk yea the site doesnt work for me either. __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

04-13-2007, 03:39 PM	#17
redmaro walbro fp Join Date: Mar 2006 Location: arizona Posts: 432	PICS PICS PICS?????? __________________ MK3, Auto, Turbo. Last edited by redmaro; 04-13-2007 at 03:45 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
87 MkIII vs 89MkIII -- parts interchange	willblock	MKIII Supra	5	07-24-2016 06:27 PM
v160 six speed rebuild..need parts	Sixspeedtalk	MKIV Supra	0	12-22-2008 02:09 AM

04-11-2007, 11:12 PM	#11
mr.w 3" Exhaust Join Date: Nov 2006 Location: Cleveland, Ohio Posts: 70	Well it all depends on the quality of the parts too. You can by cheaper parts and might actually last you a while but usally cheaper the parts the lower the quality. I know going to auto zone and buying parts is always a pain in the ass because since my cars a supra I have to pay double the price for parts on other domestic or import cars. I guess what im saying is it can be costly to run our cars and definatley costly to do reliable performance upgrades. You can buy ebay parts but they will most likely be made cheaply(sometimes you do get a good deal though).

04-12-2007, 01:55 AM	#12
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	How about a coil-on-plug setup for a 7MGTE? How about a real cold air for a GTE that sucks from where the fog light is? Lets see some pictures, because talk is cheap.

04-13-2007, 01:32 AM	#15
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	So I guess that means no coil-on-plug setup? Is there any particular reason your site doesn't work??

04-14-2007, 03:40 AM	#19
JunkerMK3gte Stock Join Date: Mar 2007 Location: Akron, Ohio Posts: 22	k.try it now. and a coil on plug set up would be a waste of money. did you know you can get more out of a CDI. upgrade to a f.a.s.t. system. itll cost you about 1.5k, but when your done youll have an ignition reliable to 12k rpm @ less than .02 ohms interferance, and more than 20k amps. you cant get better than that

04-15-2007, 04:04 AM	#20
JunkerMK3gte Stock Join Date: Mar 2007 Location: Akron, Ohio Posts: 22	im sorry dudes. honestly. ive been buildin cars my whole life .its my carreer, my family, and my hope. ive owned my mkiii now for 4 years, wrecked it twice, and rebuilt it both times. (totals) and along the way still found some way to make time to research, take numbers and draw bluprints to the entire car. i want to bring this car back to life. give it a name that it deserves. you know what i mean? ive been trying now to get these ideas together and start manufacturing all that stuff you guys cant find. see i have the resources to do this, and all of you can benifit, right? but all ive gotten in the past few months is crap. i dont understand it. but anyways, do you have ideas?....