|
To add to the Fuel Cut topic w/o stealing thread
i have the HKS FCD...my engine is bored .50 over,NGK plugs and wires, i only have a stock turbo and a MLS HG,ARP Studs, hallman MBC,Turbo XS BOV, and a make-shift intake (cone filter) im only going to run 10 psi until i do fuel pump and such. i was going to put the FCD on but do i even need it for this stage of upgrades. as of now stock fuel system but my next move is Walbro and 550's... also would really like to get my hands on a lexus AFM...
does anyone know what a car with this upgrade level should run? |
my prob is i don't know if i will be hitting fuel cut b/c i took the top end off to do the HG swap (damn 7m's) and i cant get the frickin turbo off... but i have been informed i will hit F/C when its done.... (i do have a spare turbo w/ semi low mile's...)
|
Uhhh what do you mean you can't get the turbo off? So you are saying you left the exhaust manifold and turbo still bolted to the head when you did the head gasket? Then how did the machine shop plane the head with it still attached?
You should not hit fuel cut at 10psi. |
no im saying i cant get the turbo and man. off to get the head done.
|
just to updat i cut off the exhaust right after the res. and now the turbo is loose (the bolts were stripped) so my project sjould be almost done.
|
the head is off and on its way to be decked.if you didn't understand my first post, everything was off but the turbo therfore i couldnt actualy pull the head to do the gasket, bolts were stripped but i did get it off. thanks for your help.
|
| All times are GMT. The time now is 12:49 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.