Head bolts

supramacist · 05-17-2007, 06:39 PM

ARP studs. I took mine up to 85 flbs. In 5 settings instead of 3.

G-string · 05-18-2007, 03:15 AM

have you found any problems with putting so much torque on the block, the fac specs say liek 55 pounds or 65 pounds some thing like that. since you put the new studs in have you had any head gasket problems

supramacist · 05-18-2007, 04:14 AM

g-string....., What up?

Do the studs. Some of these guys actually know what they are talking about and they aren't here to hold your hand.

I went with the studs. I torqued them in five stages. I threw a few 5lb passes in there mixed with 10 lb passes.

I went to 85ftlbs. You are not going to hurt the steel, that is your block.
Make sure you atleast lap your block. Machining the head is a must.

IMO, studs are superior to arp bolts. But that is only an opinion.

Get the tsrm for your car. There is an online tsrm that may be of use to you.
I have the book so I don't know the link but someone does.

05-18-2007, 03:15 AM	#2
G-string 3" Exhaust Join Date: Feb 2005 Location: B.C Canada Posts: 77	have you found any problems with putting so much torque on the block, the fac specs say liek 55 pounds or 65 pounds some thing like that. since you put the new studs in have you had any head gasket problems __________________ to much pizza makes me feal sick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
head bolts on jdm engine	tone loc	MKIII Supra	10	06-03-2007 09:33 PM
head gasket bolts	marc	MKIII Supra	6	10-23-2006 07:23 PM
Head Bolts, Or Head Studs??	ZauggIt1	MKIII Supra	2	08-08-2006 01:23 PM
ARP head bolts	Deputy99	MKIII Supra	2	07-19-2006 11:16 PM

05-17-2007, 06:39 PM	#1
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	ARP studs. I took mine up to 85 flbs. In 5 settings instead of 3.

05-18-2007, 04:14 AM	#3
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	g-string....., What up? Do the studs. Some of these guys actually know what they are talking about and they aren't here to hold your hand. I went with the studs. I torqued them in five stages. I threw a few 5lb passes in there mixed with 10 lb passes. I went to 85ftlbs. You are not going to hurt the steel, that is your block. Make sure you atleast lap your block. Machining the head is a must. IMO, studs are superior to arp bolts. But that is only an opinion. Get the tsrm for your car. There is an online tsrm that may be of use to you. I have the book so I don't know the link but someone does.